Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

The influence of hybridization and different manufacturing methods on the mechanical properties of the composites reinforced with basalt, jute, and flax fibers

KARAÇOR B., ÖZCANLI M., SERİN H.
Iranian Polymer Journal (English Edition) , cilt.33, sa.3, ss.289-304, 2024 (SCI-Expanded) identifier

Hybrid jute/carbon fiber composites: optimum post-curing time

Karaçor B., Özcanlı M., Kumlu U.
IRANIAN POLYMER JOURNAL (ENGLISH EDITION) , cilt.32, ss.1443-1454, 2023 (SCI-Expanded)

Properties of basalt/aramid fiber reinforced hybrid composites compared to carbon fiber composites

Çelik O., Yaşar A., Karaçor B.
POLYMER COMPOSITES , cilt.44, sa.6, ss.3509-3521, 2023 (SCI-Expanded) Sürdürülebilir Kalkınma

Thermal and mechanical characteristic investigation of the hybridization of basalt fiber with aramid fiber and carbon fiber

KARAÇOR B., ÖZCANLI M.
POLYMER COMPOSITES , cilt.43, sa.11, ss.8529-8544, 2022 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Investigation of the Use of Hybrid Composite Materials Formed Using Two Different Resins in Vehicle Bumpers

Yalçın F., Özcanlı M., Karaçor B.
Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.7, sa.2, ss.751-766, 2024 (Hakemli Dergi)

Türkiye’de Makine Mühendisliği Eğitimi Veren Üniversitelerin Mevcut Durumunun Araştırılması

KARACOR B.
Üniversite Araştırmaları Dergisi (Online) , cilt.6, sa.2, ss.191-198, 2023 (Hakemli Dergi) Creative Commons License identifier

Analysis of Mechanical Properties of Flax/Carbon Fiber Reinforced Hybrid Composites Produced Using Two Different Production Methods

Karaçor B., Özcanlı M.
Journal of Engineering Sciences and Design , cilt.11, sa.2, ss.459-473, 2023 (Hakemli Dergi)

Examination of Fiber Reinforced Composite Materials

Karaçor B., Özcanlı M.
GAZI UNIVERSITY JOURNAL OF SCIENCE , cilt.36, sa.1, ss.301-320, 2023 (Scopus)

Characterization Of Jute/Aramid Hybrid Composite Materials with Using Different Resins

Karaçor B., Özcanlı M.
SAKARYA UNIVERSITY JOURNAL OF SCIENCE , cilt.26, sa.5, ss.915-930, 2022 (Hakemli Dergi)

Evaluation of Mechanical Properties of Intraply Hybrid Carbon/Aramid Composite Materials

Karaçor B., Özcanlı M.
Uludağ Üniversitesi Mühendislik Fakültesi Dergisi , cilt.27, sa.2, ss.537-556, 2022 (Hakemli Dergi)

Post curing temperature effect on mechanical characterization of jute/basalt fiber reinforced hybrid composites

Karaçor B., Özcanlı M.
International Advanced Researches and Engineering Journal , cilt.6, sa.2, ss.90-99, 2022 (Hakemli Dergi) Sürdürülebilir Kalkınma

The effect of use of different types of matrix material on mechanical characteristics in jute/carbon fiber reinforced hybrid composites

Karaçor B., Özcanlı M.
Niğde Üniversitesi Mühendislik Bilimleri Dergisi , cilt.11, sa.2, ss.439-448, 2022 (Hakemli Dergi) Sürdürülebilir Kalkınma

Effect of Various Matrix Materials on Mechanical Properties of Basalt/Jute/Glass Fiber Reinforced Hybrid Composites

Karaçor B., Özcanlı M.
Çukurova Üniversitesi Mühendislik Fakültesi dergisi , cilt.36, sa.4, ss.941-954, 2021 (Hakemli Dergi)

Different Curing Temperature Effects on Mechanical Properties of Jute/Glass Fiber Reinforced Hybrid Composites

Karaçor B., Özcanlı M.
International Journal of Automotive Science and Technology , cilt.5, sa.4, ss.358-371, 2021 (Hakemli Dergi)

Feasibility of a Composite Material Formed with a Waste Granular Rubber Tire on Racing Vehicle Aerodynamic Wings

Karaçor B., Akar M. A., Özcanlı M., Serin H., Baş O.
Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.3, sa.2, ss.26-31, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

Investigation of Use of Hybrid Composite Materials in Automobile Interior

Karaçor B., Özcanlı M.
International Journal of Automotive Engineering and Technologies , cilt.9, sa.4, ss.214-228, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

A Case Study: Examining Vibration Analysis of Leaf Springs with Design Optimization

KARAÇOR B., ÖZCANLI M., ELÇİM M. M.
ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-IX, Ankara, Türkiye, 26 Aralık 2023, ss.199-212

Investigation of fatigue analysis in different designs and materials of commercial vehicle brake discs

KARAÇOR B., ÖZCANLI M., ÇELİKTOPUZ Ç.
ANKARA INTERNATIONAL CONGRESS ON SCIENTIFIC RESEARCH-IX, Ankara, Türkiye, 26 - 29 Aralık 2023, ss.179-198

Crashworthiness analysis of circular and elliptical cross-sectional beams in vehicle door

Kumlu U., Karaçor B., Özkeser B., Aslan A.
IV.International Siirt Conference on Scientific Research, Siirt, Türkiye, 17 - 18 Kasım 2023, ss.287-300

Examination of different material designs through finite element analysis on the military vehicle platform

Kumlu U., Karaçor B., Kılınç Ö., Aslan A.
IV. International Siirt Conference on Scientific Research, Siirt, Türkiye, 17 - 18 Kasım 2023, ss.268-286

A case study: Vibration analysis by finite element method in electric micro vehicle chassis

Karaçor B., Hükümdar Ö., Özcanlı M.
9th International Black Sea Coastline Countries Scientific Research Conference, Ankara, Türkiye, 10 - 11 Ağustos 2023, ss.412-426

Investigation of fatigue life using finite element method with the use of different materials in leaf spring design

Karaçor B., Hükümdar Ö., Özcanlı M.
9th International Black Sea Coastline Countries Scientific Research Conference, Ankara, Türkiye, 10 - 11 Ağustos 2023, ss.140-154

Thermal analysis on brake disc structures of different geometric design shapes and material usage

Karaçor B., Hükümdar Ö., Özcanlı M.
4th International Black Sea Modern Scientific Research Congress, Rize, Türkiye, 06 Haziran 2023, ss.1634-1648

Effects of using different materials on the crankshaft in modal analysis

Karaçor B., Hükümdar Ö., Özcanlı M.
4th International Black Sea Modern Scientific Research Congress, Rize, Türkiye, 06 Haziran 2023, ss.1611-1633

Modal analysis and structural simulation of heavy commercial vehicle chassis

Karaçor B., Özcanlı M., Hükümdar Ö.
3th International Mediterranean Congress, Mersin, Türkiye, 17 - 18 Nisan 2023, ss.582-602

A case study: Fatigue analysis simulation using different materials on the front axle

Karaçor B., Özcanlı M., Hükümdar Ö.
3th International Mediterranean Congress, Mersin, Türkiye, 17 - 18 Nisan 2023, ss.568-581

Thermogravimetric analysis in nitrogen ambient of copper/titania selective catalytic reduction catalyst poisoned with calcium

Özarslan H., Karaçor B.
3th International Siirt Scientific Research Congress, Siirt, Türkiye, 18 - 19 Kasım 2022, ss.586-595

Ballistic evaluation of armor plates at different angles

Kumlu U., Akar M. A., Başer D., Hükümdar Ö., Karaçor B.
2nd International Congress on Multidisciplinary Natural Sciences, Ankara, Türkiye, 01 Aralık 2022, ss.230-240 Sürdürülebilir Kalkınma

A case study: Weight reduction studies on an electric micro car using different materials

Karaçor B., Hükümdar Ö., Göktepe S., Tombuloğlu A. Ç., Özcanlı M.
3th International Siirt Scientific Research Congress, Siirt, Türkiye, 18 Kasım 2022, ss.2835-2848

The effect of the use of different materials and design optimization in the connecting rod on fatigue analysis

Karaçor B., Duman A. K., Özcanlı M.
2nd International Congress on Multidisciplinary Natural Sciences(ICOMNAS 2022), 1 - 02 Aralık 2022, ss.219-229

Effect of rotational thrust on different geometries in crashing boxes

Kumlu U., Erdal D., Karaçor B., Akar M. A.
7th International Mediterranean Science and Engineering Congress (IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, cilt.1, sa.212, ss.508-514

The effect of air gap of multi-layered armour configuration during ballistic impact

Kumlu U., Aldatmaz İ., Akar M. A., Karaçor B., Ercan E. S., Erdal D.
7th International Mediterranean Science and Engineering Congress (IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, cilt.1, sa.236, ss.565-570

Effect of cerium addition on thermogravimetric analysis of iron/titania catalyst for selective catalytic reduction system

Özarslan H., Karaçor B.
7th International Mediterranean Science and Engineering Congress(IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, ss.189-192

Investigation of high-strength steel usage in Cukurova 885 model backhoe loader boom

Gurbet Z., Karahan Ü., Pesen E., Karaçor B., Özcanlı M.
7th International Mediterranean Science and Engineering Congress(IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, ss.574 Sürdürülebilir Kalkınma

Fatigue analysis and weight reduction studies in rear axle design using different materials

Karaçor B., Hükümdar Ö., Eşki Ü., Divanoğlu A., Özcanlı M.
7th International Mediterranean Science and Engineering Congress(IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, ss.255-262

Crashworthiness analysis of heavy truck chassis by using finite element analysis

Karaçor B., Kapulu İ., Kumlu U., Özcanlı M.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.635-642

Investigation of bucket teeth stress-deformation distribution by using ultra high strength material

Gurbet Z., Karaçor B., Özcanlı M.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.590-594 Sürdürülebilir Kalkınma

Investigation of modal analysis of connecting rod by using ultra- high strength steel

Karaçor B., Temiz F., Sonat S., Özcanlı M.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.604-608

Ballistic performance of multi-layered armor steel plates

Karaçor B., Kartal K.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.597-603

A case study: The use of different projectile types to determine the ballistic performance of armored plates

Karaçor B., Kazanlık C.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.669-674 Sürdürülebilir Kalkınma

Investigation of fatigue behaviour of different materials on crankshaft

Karaçor B., Demirtaş F., Ata F., Özcanlı M.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.579-584

Evaluation of ultra-high strength materials in heavy truck chassis

Karaçor B., Hükümdar Ö., Akdağcık D., Özcanlı M.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Adana, Türkiye, 25 - 27 Ekim 2021, ss.585-589

Comparison of stainless steel and ultra-high strength steel usage as a piston head material in internal combustion engines

Özcanlı M., Akar M. A., Karaçor B.
5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.254-258

Evaluation of ultra-high strength steel as a material for connecting rod

Çalık A., Karaçor B., Tosun E., Özcanlı M.
5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.249-253

Advanced steel applications for race car protection bars

Karaçor B., Özcanlı M.
5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.245-248 Sürdürülebilir Kalkınma

Advanced steel usage as a crankshaft materials in internal combustion engines; A case study

Karaçor B., Özcanlı M., Akar M. A.
5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.240-244

Ultra-high strength steel usage in a sedan car chassis: A theoretical study

Özcanlı M., Karaçor B., Akar M. A., Serin H.
4th International Symposium the Environment and the Industry, SIMI 2019, Bucuresti, Romanya, 25 - 27 Eylül 2019, ss.56-57

Recycled composite usage for race car wing production: Effect of the surface roughness on aerodynamics

Akar M. A., Karaçor B., Özcanlı M., Serin H.
4th International Symposium the Environment and the Industry, SIMI 2019, Bucuresti, Romanya, 25 - 27 Eylül 2019, ss.55

Investigation of stress and displacement distribution in ultra high strength steel car chassis

Karaçor B., Özcanlı M.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019

Comparison of St-52 steel and ultra-high strength steel as a of pipe type chassis material for formula student race car

Karaçor B., Özcanlı M., Akar M. A., Yıldızhan Ş., Serin H.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.671-674

Cotton/Epoxy Bio-Composite usage as an impact attenuator material for formula student race cars

ÖZCANLI M., KARAÇOR B., YILDIZHAN Ş., SERİN H.
European Biotechnology Congress, Athens, Yunanistan, 26 - 28 Nisan 2018, cilt.280 identifier

Metrikler

Yayın

56

Atıf (Scopus)

2

H-İndeks (Scopus)

1

Proje

3

Açık Erişim

1
BM Sürdürülebilir Kalkınma Amaçları