Prof. Dr. MUSTAFA ATAKAN AKAR

Yayın Ağı

Makaleler 47

1. Characterization of Ni-W/hBN nanocomposite electrodeposits

Keskin A., Hukumdar O., Kumlu U., AKAR M. A., Tosun E., KEYİNCİ S.

CERAMICS INTERNATIONAL , cilt.51, sa.25, ss.44857-44871, 2025 (SCI-Expanded, Scopus)

2. Numerical crashworthiness analysis of improved elliptical cross-section straight and tapered thin-walled crashing boxes

Yildizhan S., Kumlu U., Akar M. A., Keskin A., Hukumdar Ö.

MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.53, sa.6, ss.4294-4311, 2025 (SCI-Expanded, Scopus)

3. Investigation of micro-perforated plate structure and cavity used as Helmholtz resonator in wheel arch liner

GULTEKIN Y., JEAN T., akar m., UMUT K.

European Mechanical Science , cilt.9, sa.1, ss.38-45, 2025 (Hakemli Dergi)

4. Investigation of the effect of bath temperature on Ni-W/Al2O3 nanocomposite coatings produced by electrodeposition method

Aybacı Y., Yalyanç F., Kocabuğa F. N., Hükümdar Ö., Kumlu U., Keskin A., et al.

International Journal of Automotive Engineering and Technologies , cilt.14, sa.1, ss.47-55, 2025 (Hakemli Dergi)

5. Effect of TMAB and ZrC concentration on mechanical and morphological properties of Ni-B/ZrC composite electrodeposition

Hükümdar Ö., Kumlu U., Keskin A., Akar M. A.

MATERIALS TESTING , cilt.67, sa.1, ss.17-35, 2025 (SCI-Expanded)

6. Investigation of the effect of current density and ZrO2 bath concentration on electrodeposited Ni-P/ZrO2 composite coatings

HÜKÜMDAR Ö., KUMLU U., KESKİN A., AKAR M. A., GEÇKİN M. F., ÇAMCI E. N., et al.

ENGINEERING SCIENCES , cilt.14, sa.1, ss.52-59, 2025 (Hakemli Dergi)

7. Examination of mechanical and morphological properties of jute/cotton natural fiber reinforced hybrid composites

Yıldızhan Ş., Tosun A. T., akar m., UMUT K.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.31, sa.1, ss.9-16, 2025 (ESCI, TRDizin)

8. Ahmed Cisminde Çukurlu Yüzeyler Kullanmanın Akış Karakteristiklerine Etkisi

AYDIN V. K., AKAR M. A., BAŞ O., KUMLU U.

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.7, sa.3, ss.1358-1373, 2024 (TRDizin)

9. Investigation of the under-vehicle plastic protection parts manufactured by core-back injection process in terms of strength and weight

GÜLTEKİN Y., AKAR M. A., ALTINDAĞ A., DURAN D., KUMLU U.

International Journal of Automotive Engineering and Technologies , cilt.12, sa.4, ss.133-143, 2023 (Hakemli Dergi)

10. Numerical investigation of crash behavior of vehicle side door beams under high-speed pole side impacts

AKAR M. A., Kumlu U., Yildizhan S.

PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.237, sa.14, ss.3408-3418, 2023 (SCI-Expanded)

11. Analysis of the wear and friction of brake pad added cashew and ulexite using ANSYS

Akar M. A., Sugözü İ., Bilgi G., Kumlu U.

International Journal of Automotive Engineering and Technologies , cilt.12, sa.3, ss.83-91, 2023 (Hakemli Dergi)

12. Investigation on Flow Characteristics of Generic Car Body with Different Boundary Conditions

Keiyinci S., Baş O., Akar M. A.

SCIENTIA IRANICA INTERNATIONAL JOURNAL OF SCIENCE & TECHNOLOGY , cilt.1, sa.1, ss.1-12, 2023 (SCI-Expanded)

13. Base Bleed Flow Control Tool for Circular Cylinders with three Side-By-Side Arrangements in Shallow Water

AKAR M. A., AKILLI H.

International Journal of Pioneering Technology and Engineering , cilt.2, sa.1, ss.128-134, 2023 (Hakemli Dergi)

14. Combined effects of hydrogen and TiO2 nanoparticle additive on terebinth oil biodiesel operated diesel engine

Çalık A., Tosun E., Akar M. A., Özcanlı M.

SCIENCE AND TECHNOLOGY FOR ENERGY TRANSITION , cilt.78, ss.1-6, 2023 (SCI-Expanded)

15. TAŞIT AERODİNAMİĞİNDE KULLANILAN AHMED CİSMİNİN AKIŞ MODELİ İÇİN PRİZMATİK AĞ KATMANI OLUŞTURURKEN İZLENECEK STRATEJİ

KEİYİNCİ S., AKAR M. A., BAŞ O., ÖZCANLI M.

Mühendislik Bilimleri ve Tasarım Dergisi , cilt.10, sa.3, ss.776-785, 2022 (Hakemli Dergi)

16. Investigation of low-temperature performances of hybrid catalysts with different chain length OHC reductants.

Keskin Z., Akar M. A.

Environmental technology , cilt.43, ss.1927-1934, 2022 (SCI-Expanded)

17. A Review on Biodiesel: From Feedstock to Utilization in Internal Combustion Engines

Tosun E., Özcanlı M., Akar M. A.

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.5, sa.1, ss.417-428, 2022 (TRDizin) Sürdürülebilir Kalkınma

18. Tensile and Morphological Properties of Waste Tire Rubber Granule/Polyester Polymer Matrix Composite

YILDIZHAN Ş., Yel F., AKAR M. A., KUMLU U.

Çukurova Üniversitesi Mühendislik Fakültesi dergisi , cilt.37, sa.3, 2022 (Hakemli Dergi)

19. Feasibility of a Composite Material Formed with a Waste Granular Rubber Tire on Racing Vehicle Aerodynamic Wings

Karaçor B., Akar M. A., Özcanlı M., Serin H., Baş O.

Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi , cilt.3, sa.2, ss.26-31, 2020 (Hakemli Dergi) Sürdürülebilir Kalkınma

20. Variation of spark plug type and spark gap with hydrogen and methanol added gasoline fuel: Performance characteristics

Baş O., AKAR M. A., SERİN H., ÖZCANLI M., TOSUN E.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.45, sa.50, ss.26513-26521, 2020 (SCI-Expanded)

21. Reducing emissions of an SI engine by alternative spark plugs with hydrogen addition and variable compression ratio

Baş O., Akar M. A., Serin H.

International Journal of Automotive Engineering and Technologies , cilt.9, sa.2, ss.94-104, 2020 (Hakemli Dergi)

22. PERFORMANCE OF AN SI ENGINE WITH DIFFERENT SPARK PLUGS, VCR AND H2 ADDITION

BAŞ O., AKAR M. A., SERİN H., ÖZCANLI M.

Sigma Journal of Engineering and Natural Sciences , cilt.38, sa.4, ss.1951-1961, 2020 (ESCI)

23. Characterization of SCR Catalyst Based Ag-Nb-Pt

KESKİN A., YAŞAR A., Zeycan K., AKAR M. A., REŞİTOĞLU İ. A., ÖZARSLAN H., et al.

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.33, sa.4, ss.9-16, 2018 (Hakemli Dergi)

24. Effect of Spark Plug Alteration on Performance Using Hydrogen Enriched Gasoline in Si Engine Under Various Loads and Compression Ratios

BAŞ O., AKAR M. A., YILDIZHAN Ş., ÖZCANLI M., SERİN H.

EUROPEAN MECHANICAL SCIENCE , cilt.2, ss.92-95, 2018 (Hakemli Dergi)

25. Hydrogen enriched waste oil biodiesel usage in compression ignition engine

AKAR M. A., KEKILLI E., BAŞ O., YILDIZHAN Ş., SERİN H., ÖZCANLI M.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.43, sa.38, ss.18046-18052, 2018 (SCI-Expanded) Sürdürülebilir Kalkınma

26. Recent studies on hydrogen usage in Wankel SI engine

ÖZCANLI M., BAŞ O., AKAR M. A., YILDIZHAN Ş., SERİN H.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.43, sa.38, ss.18037-18045, 2018 (SCI-Expanded)

27. Investigation the Fuel Properties of Apricot Kernel Biodiesel and Diesel-Biodiesel Fuel Blends

ÖZGÜR C., YAKARYILMAZ A. C., TOSUN E., AKAR M. A., ÖZGÜR T.

JOURNAL OF BIOTECHNOLOGY , cilt.208, ss.30, 2018 (SCI-Expanded)

28. The effect of the splitter plates on flow characteristics that are vertically placed to the flow between side by side cylinders in shallow water

AKAR M. A., AKILLI H., BAŞ O., Oguz B., PINAR E., ŞAHİN B.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.24, sa.4, ss.582-585, 2018 (ESCI)

29. Using HHO (Hydroxy) and hydrogen enriched castor oil biodiesel in compression ignition engine

ÖZCANLI M., AKAR M. A., Calik A., SERİN H.

INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.42, sa.36, ss.23366-23372, 2017 (SCI-Expanded)

30. Vortex shedding control on a bare cylinder using hexagonal perforated outer cylinder

AKAR M. A., Kucuk M.

CANADIAN JOURNAL OF PHYSICS , cilt.95, sa.1, ss.69-84, 2017 (SCI-Expanded)

31. Altıgen Delikli Silindirin Geçirgenlik Oranının Silindir Arkasındaki Akış Bölgesine Etkisi

AKAR M. A., BAŞ O., KÜÇÜK M.

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.31, sa.2, ss.79-86, 2016 (Hakemli Dergi)

32. Flow behavior downstream of two side-by-side circular cylinders in shallow water

AKAR M. A., Oguz B., AKILLI H., ŞAHİN B.

CANADIAN JOURNAL OF PHYSICS , cilt.94, sa.10, ss.975-981, 2016 (SCI-Expanded)

33. Performance and emission characteristics of compression ignition engine operating with false flax biodiesel and butanol blends

AKAR M. A.

ADVANCES IN MECHANICAL ENGINEERING , cilt.8, sa.2, 2016 (SCI-Expanded)

34. Control of flow structure in the wake region of circular cylinder with meshy wire in deep water

Oguz B., AKAR M. A., PINAR E., AKILLI H., ŞAHİN B.

PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.22, sa.4, ss.280-284, 2016 (ESCI)

35. Control of Vortex Shedding around a Circular Cylinder by Using Mesh Wire

OĞUZ B., AKAR M. A., PINAR E., AKILLI H., ŞAHİN B.

Control of Vortex Shedding around a Circular Cylinder by Using Mesh Wire , cilt.1, sa.7, ss.18-26, 2015 (Hakemli Dergi)

36. Control of Vortex Shedding around a Circular Cylinder byUsing Meshy Wire

Oğuz B., AKAR M. A., PINAR E., AKILLI H., ŞAHİN B.

International Journal of Scientific and Technological Research , cilt.1, sa.7, ss.18-26, 2015 (Hakemli Dergi)

37. Silindir Arkasındaki Daimi Olmayan Akış Yapısının Pasif Yöntemle Kontrolü

AKAR M. A., küçük m.

Pamukkale Üniversitesi Mühendislik Bilimleri Dergisi , cilt.20, sa.4, ss.123-128, 2014 (Hakemli Dergi)

38. The Influence of Diesel Fuel-biodiesel-ethanol-butanol Blends on the Performance and Emission Characteristics of a Diesel Engine

Keskin A., YAŞAR A. N., Resitoglu I., Akar M. A., Sugozu I.

ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.35, sa.19, ss.1873-1881, 2013 (SCI-Expanded)

39. Silindir Arkasındaki Akış Yapısının Delikli Silindirlerle Pasif Kontrolü

KÜÇÜK M., AKAR M. A.

Makine Teknolojileri Elektronik Dergisi , cilt.10, sa.1, ss.35-42, 2013 (Hakemli Dergi)

40. Suppression of asymmetric flow behavior downstream of two side-by-side circular cylinders with a splitter plate in shallow water

Oruc V., Akar M. A., AKILLI H., ŞAHİN B.

MEASUREMENT , cilt.46, sa.1, ss.442-455, 2013 (SCI-Expanded)

41. Sığ Suda Yanyana Sıralı İki Silindir Arkasındaki Daimi Olmayan Akış Yapısnın İncelenmesi

AKAR M. A., AKILLI H., ŞAHİN B.

Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.26, sa.2, ss.99-104, 2011 (Hakemli Dergi)

42. Artificial neural network approaches for prediction of backwater through arched bridge constrictions

PINAR E., Paydas K., SEÇKİN G., AKILLI H., ŞAHİN B., Cobaner M., et al.

ADVANCES IN ENGINEERING SOFTWARE , cilt.41, sa.4, ss.627-635, 2010 (SCI-Expanded)

43. Qualitative and quantitative measurements of horseshoe vortex formation in the junction of horizontal and vertical plates

ŞAHİN B., AKILLI H., Karakus C., AKAR M. A., Ozkul E.

MEASUREMENT , cilt.43, sa.2, ss.245-254, 2010 (SCI-Expanded)

44. Sığ Suda Yan Yana Sıralı İki Silindir Arkasında Oluşan Akış Yapısının Pasif Yöntemle Kontrolü

AKAR M. A., AKILLI H.

Ç.Ü. Fen Bilimleri Enstitüsü , cilt.19, sa.3, ss.20-24, 2008 (Hakemli Dergi)

45. Control of vortex shedding of circular cylinder in shallow water flow using an attached splitter plate

AKILLI H., KARAKUŞ C., Akar A., ŞAHİN B., Tumen N. F.

JOURNAL OF FLUIDS ENGINEERING-TRANSACTIONS OF THE ASME , cilt.130, sa.4, 2008 (SCI-Expanded)

46. Flow characteristics of circular cylinders arranged side-by-side in shallow water

Akilli H., Akar A., Karakus C.

FLOW MEASUREMENT AND INSTRUMENTATION , cilt.15, sa.4, ss.187-197, 2004 (SCI-Expanded)

47. Akışkanlar Mekaniği Uygulamalarında Parçacık Görüntülemeli Hız Ölçme Tekniği

ŞAHİN B., AKILLI H., ÖZTÜRK N. A., KARAKUŞ C., KAHRAMAN A., AKAR M. A., et al.

Ç.Ü. Müh. Mim. Fak. Dergisi , cilt.18, sa.18, ss.103-111, 2003 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 91

1. Influence of Section Geometry and Material Selection on Energy Absorption in Crash Boxes: A Finite Element Approach

Kumlu U., Hükümdar Ö., Gök Y., Akar M. A., Keskin A.

5th INTERNATIONAL PARIS CONGRESS ON APPLIED SCIENCES, Paris, Fransa, 4 - 08 Ağustos 2025, ss.21-37, (Tam Metin Bildiri)

2. Crashworthiness Analysis of Horizontal and Vertical Elliptical Cross-Sectİonal Beams in Vehicle Doors

Kumlu U., Hükümdar Ö., Kersin M., Akar M. A., Keskin A.

5th INTERNATIONAL PARIS CONGRESS ON APPLIED SCIENCES, Paris, Fransa, 4 - 08 Ağustos 2025, ss.38-49, (Tam Metin Bildiri)

3. Electrodeposited High Entropy Alloys: Effects on Surface Properties and Structural Integrity

Kumlu U., Akar M. A., Keskin A., Hükümdar Ö.

7th INTERNATIONAL CONGRESS on CONTEMPORARY SCIENTIFIC RESEARCH, Rome, İtalya, 30 Mart - 06 Nisan 2025, ss.36, (Özet Bildiri)

4. Synthesis and Mechanical Properties Investigation of Ni–P/Ni–B–Cr3C2 Duplex Composite Coatings

AŞGAN S. M., HÜKÜMDAR Ö., KUMLU U., KESKİN A., AKAR M. A.

11. INTERNATIONAL EUROPEAN CONGRESS ON ADVANCED STUDIES IN BASIC SCIENCES, ROMA, İtalya, 11 Kasım 2024, ss.128-141, (Tam Metin Bildiri)

5. Effect of TMAB and Cr3C2 concentration on surface hardness of Ni-B/Cr3C2 composite electrodeposition

AKAR M. A., KESKİN A., KUMLU U., HÜKÜMDAR Ö.

8th International Conference on Engineering Technology and Innovation (ICETI 2024), SARAYBOSNA, Bosna-Hersek, 2 - 06 Ekim 2024, (Özet Bildiri)

6. Effect of Pulse Frequency on Mechanical Properties of Electrodepositon Ni-W/Al2O3 Nanocomposites on Copper Substrate

AYBACI Y., YALYANÇ F., HÜKÜMDAR Ö., KUMLU U., KESKİN A., AKAR M. A.

CUKUROVA 13th INTERNATIONAL SCIENTIFIC RESEARCHES CONFERENCE, Adana, Türkiye, 01 Eylül 2024, ss.400-412, (Tam Metin Bildiri)

7. Investigation of The Effect of Bath Temperature on Ni-W/Al2O3 Nanocomposite Coatings Produced by Electrodeposition Method

AYBACI Y., YALYANÇ F., KOCABUĞA F. N., HÜKÜMDAR Ö., KUMLU U., KESKİN A., et al.

CUKUROVA 13th INTERNATIONAL SCIENTIFIC RESEARCHES CONFERENCE, Adana, Türkiye, 01 Eylül 2024, ss.272, (Özet Bildiri)

8. Ballistic evaluation of armor plates at different angles

Kumlu U., Akar M. A., Başer D., Hükümdar Ö., Karaçor B.

2nd International Congress on Multidisciplinary Natural Sciences, Ankara, Türkiye, 01 Aralık 2022, ss.230-240, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

9. The effect of air gap of multi-layered armour configuration during ballistic impact

Kumlu U., Aldatmaz İ., Akar M. A., Karaçor B., Ercan E. S., Erdal D.

7th International Mediterranean Science and Engineering Congress (IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, cilt.1, sa.236, ss.565-570, (Tam Metin Bildiri)

10. Effect of rotational thrust on different geometries in crashing boxes

Kumlu U., Erdal D., Karaçor B., Akar M. A.

7th International Mediterranean Science and Engineering Congress (IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, cilt.1, sa.212, ss.508-514, (Tam Metin Bildiri)

11. Crashworthiness Analysis of Vehicle Side Door Beam with Finite Element Analysis

Kumlu U., Akar M. A., Özcanlı M., Serin H., Çalık A.

6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.615, (Özet Bildiri)

12. Evaluation of Jute and Cotton Fabrics as Reinforcement Agent in Polymer Matrix Composites

Tosun A. T., Akar M. A., Kumlu U.

6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.311, (Özet Bildiri)

13. Recycled Waste Tyre Granules as Filler Material in Polymer Matrix: Mechanical Characterization Assessment

Yel F., Akar M. A., Kumlu U.

6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.310, (Özet Bildiri)

14. Taşıt Aerodinamiği Araştırmalarında Daha Gerçekçi bir Model: DrivAer

Baş O., Akar M. A., Özcanlı M., Serin H., Keiyinci S.

6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.370, (Özet Bildiri)

15. A Study to Investigate The Effect of Dimpled Surfaces and Linking Tunnels on Ahmed Car Model Flow Characteristics

Aydın V. K., Akar M. A., Baş O., Özcanlı M., Keiyinci S.

6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.155, (Özet Bildiri)

16. Assessment of Hydrogen Utilization in Compression Ignition Engines as a Sustainable Fuel: An Overview

Tosun E., Özcanlı M., Akar M. A., Özgür T., Serin H.

6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.448, (Özet Bildiri)

17. Kolemanit ve Boraks Takviyeli Fren Balatalarının Sürtünme ve Aşınma Davranışlarının Simülasyonu

Yaşar G., Bilgi G., Akar M. A., Sugözü İ., Özcanlı M.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.359, (Özet Bildiri) Sürdürülebilir Kalkınma

18. Advanced steel usage as a crankshaft materials in internal combustion engines; A case study

Karaçor B., Özcanlı M., Akar M. A.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.240-244, (Tam Metin Bildiri)

19. A Review on Design Characteristics of Speed Breaker Systems and New Trends

Akar M. A., Yel F., Yıldırım A. T., Tosun E., Özcanlı M.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.311, (Özet Bildiri) Sürdürülebilir Kalkınma

20. A Benchmark Study for Front Wing Design of a Formula Student Race Car

Özcanlı M., Akar M. A., Baş O.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.310, (Özet Bildiri)

21. Bir Model Kara Taşıtının (Ahmed Body) Geometrik Modifikasyonlarının Hesaplamalı Akışkanlar Dinamiği Analizi ve Optimizasyonu

Akar M. A., Vural B., Özcanlı M., Baş O.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.787-790, (Tam Metin Bildiri)

22. Influence of Hybrid Catalysts on SCR Systems

Akar M. A., Keskin Z.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.464, (Özet Bildiri)

23. Numerical Investigations of Curved Slanted Surface on the Ahmed Body

Akar M. A., Oran A. H., Özcanlı M., Baş O.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.307, (Özet Bildiri)

24. Comparison of stainless steel and ultra-high strength steel usage as a piston head material in internal combustion engines

Özcanlı M., Akar M. A., Karaçor B.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.254-258, (Tam Metin Bildiri)

25. A Short Review on Water Emulsified Fuel Effects on Engine Performance and Emission Characteristics

Tosun E., Özcanlı M., Özgür T., Akar M. A., Serin H.

5th International Mediterranean Science and Engineering Congress (IMSEC 2020), Antalya, Türkiye, 21 - 23 Ekim 2020, ss.374-378, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

26. A Literature Review of Ignition System and Spark Plug Studies

AKAR M. A., BAŞ O.

2. ULUSLARARASI 19 MAYIS YENİLİKÇİ BİLİMSEL YAKLAŞIMLAR KONGRESİ, 27 - 29 Aralık 2019, (Özet Bildiri)

27. Ultra-high strength steel usage in a sedan car chassis: A theoretical study

Özcanlı M., Karaçor B., Akar M. A., Serin H.

4th International Symposium the Environment and the Industry, SIMI 2019, Bucuresti, Romanya, 25 - 27 Eylül 2019, ss.56-57, (Tam Metin Bildiri)

28. Recycled composite usage for race car wing production: Effect of the surface roughness on aerodynamics

Akar M. A., Karaçor B., Özcanlı M., Serin H.

4th International Symposium the Environment and the Industry, SIMI 2019, Bucuresti, Romanya, 25 - 27 Eylül 2019, ss.55, (Tam Metin Bildiri)

29. Ahmed Body Drag Reduction by Usage of Dimpled and Bumped Surface

AKAR M. A., Aydın V. K., BAŞ O., ÖZCANLI M.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), 25 - 27 Nisan 2019, ss.864-869, (Tam Metin Bildiri)

30. Ag-Cu-Nb/Kordiyerit HC-SCR Katalizör Üretimi ve Analizi

AKAR M. A., Keskin Z.

4th International Mediterranean Science and Engineering Congress, 25 - 27 Nisan 2019, (Tam Metin Bildiri)

31. Analysis of Wear and Friction Using ANSYS of Brake Pad Added Cashew and Ulexit

AKAR M. A., SUGÖZÜ İ., BİLGİ G., ÖZCANLI M.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), 25 - 27 Nisan 2019, ss.1206-1208, (Tam Metin Bildiri)

32. Variation of Spark Plug and Spark Gap Size with Hydrogen and Ethanol Added Gasoline Fuel: Performance Characteristics

BAŞ O., AKAR M. A., SERİN H., ÖZCANLI M.

4th International Mediterranean Science and Engineering Congress, 25 - 27 Nisan 2019, (Özet Bildiri)

33. Ag-Ti-Cu/ Kordiyerit Katalizör Üretimi ve Karakterizasyon Analizi

AKAR M. A., Keskin Z.

4th International Mediterranean Science and Engineering Congress, 25 - 27 Nisan 2019, (Tam Metin Bildiri)

34. Comparison of St-52 steel and ultra-high strength steel as a of pipe type chassis material for formula student race car

Karaçor B., Özcanlı M., Akar M. A., Yıldızhan Ş., Serin H.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.671-674, (Tam Metin Bildiri)

35. Manufacturing Methods of Polymer Matrix Composites: A Brief Review of Techniques Convenient for Mass Production

YILDIZHAN Ş., AKAR M. A., ÖZCANLI M., SERİN H.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.395-399, (Tam Metin Bildiri)

36. Drag Coefficient Reduction Studies on Ahmed Body: A Review

AKAR M. A., Vural B., çalık a., SERİN H., ÖZCANLI M.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.1199-1204, (Tam Metin Bildiri)

37. Applications of Shear Thickening Fluids (STFs) and Preparation : A Review

AKAR M. A., YILDIRIM A. T., ÇALIK A., ÖZCANLI M.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.881-883, (Tam Metin Bildiri)

38. SCR Sistemine Yönelik Ti-V-Mo/Kordiyerit Katalizörünün Üretimi ve Karakterizasyonu

AKAR M. A., Keskin Z.

International Mediterranean Science and Engineering Congress, 24 - 26 Ekim 2018, (Tam Metin Bildiri)

39. Etanolun İndirgeyici Olarak Kullanımının SCR Sisteminde NOx Dönüşümüne Olan Etkisi

AKAR M. A., Keskin Z.

International Mediterranean Science and Engineering Congress, 24 - 26 Ekim 2018, (Tam Metin Bildiri)

40. Effect of bioethanol blending with gasoline on emissions characteristics with spark plug alteration for SI engine

AKAR M. A., BAŞ O., ÖZGÜR T., ÖZCANLI M.

European Biotechnology Congress, Athens, Yunanistan, 26 - 28 Nisan 2018, cilt.280, (Özet Bildiri)

41. Micro hardness and water absorption properties of Cotton/Epoxy Bio-Composite

SERİN H., YILDIZHAN Ş., ÖZCANLI M., AKAR M. A.

European Biotechnology Congress, Athens, Yunanistan, 26 - 28 Nisan 2018, cilt.280, (Özet Bildiri)

42. Investigation the fuel properties of apricot kernel biodiesel and diesel-biodiesel fuel blends

Ozgur C., YAKARYILMAZ A. C., TOSUN E., AKAR M. A., ÖZGÜR T.

European Biotechnology Congress, Athens, Yunanistan, 26 - 28 Nisan 2018, cilt.280, (Özet Bildiri)

43. Energy and Exergy Analysis 1kW Self-humidified PEM Fuel Cell

ÖZGÜR T., YAKARYILMAZ A. C., TOSUN E., AKAR M. A., ÖZCANLI M.

3 rd İnternational Hydrogen Technologies Congress (IHTEC 2018), 15 - 18 Mart 2018, (Tam Metin Bildiri)

44. Energy and Exergy Analysis of 1 kW Self-humidified PEM Fuel Cell

ÖZGÜR T., YAKARYILMAZ A. C., TOSUN E., AKAR M. A., ÖZCANLI M.

3rd International Hydrogen Technologies Congress, Antalya, Türkiye, 15 - 18 Mart 2018, ss.106, (Tam Metin Bildiri)

45. A case study of energy efficiency in annealing furnaces

AKAR M. A., ÇERÇİ K. N., YILDIRIM A., SÖYLER M., GÜNEŞER G.

International Advanced Reseaches and Engineering Congress (IAREC 17), Türkiye, 16 - 18 Ekim 2017, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

46. Nano-Metal Katalizör Katkılarının Üç Yollu Katalitik Konvertörün (TWC) Karbon Monoksit (CO) Oksitlemesine Etkileri

AKAR M. A., ÇALIK A., BAŞ O., YILDIZHAN Ş.

IV. ULUSAL MÜHENDİSLİK KONGRESİ, Afyon, Türkiye, 22 - 25 Aralık 2017, ss.20, (Özet Bildiri)

47. Recent Studies on hydroegn usage in rotary SI engine

ÖZCANLI M., BAŞ O., AKAR M. A., YILDIZHAN Ş., SERİN H.

2nd International Mediterranean SCIENCE AND ENGINEERING CONGRESS, 25 - 27 Ekim 2017, (Özet Bildiri)

48. Eﬀect of Hydrogen Enrched Nigella Satva Ol Bodesel on Performance and Emssons

SERİN H., YILDIZHAN Ş., BAŞ O., AKAR M. A., ÖZCANLI M.

2nd Interna onal Mediterranean Science and Engineering Congress (IMSEC 2017), 25 - 27 Ekim 2017, ss.2277, (Özet Bildiri)

49. Hydrogen Enriched Waste Aoil Biodiesel Usage in Compression Ignition Engine

AKAR M. A., kekilli e., BAŞ O., YILDIZHAN Ş., SERİN H., ÖZCANLI M.

2nd International Mediterranean SCIENCE AND ENGINEERING CONGRESS, 25 - 27 Ekim 2017, (Özet Bildiri)

50. Recent studes on hydrogen usage n rotary SI engne

ÖZCANLI M., BAŞ O., AKAR M. A., YILDIZHAN Ş., SERİN H.

2nd Interna onal Mediterranean Science and Engineering Congress (IMSEC 2017), 25 - 27 Ekim 2017, ss.2279, (Özet Bildiri)

51. Hydrogen Enrched Waste Ol Bodesel Usage n Compresson Ignton Engne

AKAR M. A., kekilli e., BAŞ O., YILDIZHAN Ş., SERİN H., ÖZCANLI M.

2nd Interna onal Mediterranean Science and Engineering Congress (IMSEC 2017), 25 - 27 Ekim 2017, ss.2278, (Özet Bildiri)

52. Ti-V-Cu Esaslı SCR Sistem Katalizör Üretimi ve KarakterizeEdilmesi

AKAR M. A., Keskin Z.

2nd International Mediterranean Science and Engineering Congress, Türkiye, 25 - 27 Ekim 2017, (Özet Bildiri)

53. Gümüş-Niyobyum Esaslı HC-SCR Sistem Katalizör Sentezi veKarakterizasyonu

AKAR M. A., Keskin Z.

2nd International Mediterranean Science and Engineering Congress, Türkiye, 25 - 27 Ekim 2017, (Tam Metin Bildiri)

54. Ag-Nb-Pt esaslı SCR katalizör sentezi

KESKİN A., AYDIN K., AKAR M. A., YAŞAR A., REŞİTOĞLU İ. A., ÖZARSLAN H.

2nd International MediterraneanSCIENCE AND ENGINEERING CONGRESS, 25 - 27 Ekim 2017, ss.2260, (Özet Bildiri)

55. Ag-Nb-Pt esaslı SCR sistemi katalisti sentezi

KESKİN A., AYDIN K., AKAR M. A., YAŞAR A., REŞİTOĞLU İ. A., ÖZARSLAN H.

2nd International Mediterranean Science and Engineering Congress, 25 - 27 Ekim 2017, (Özet Bildiri)

56. Flow Characteristics Of Vertical Splitter Plate Used Side BySide Cylinder With Different Gap Ratios

AKAR M. A., AKILLI H., Baş O., OĞUZ B., PINAR E., ŞAHİN B.

Second International Mediterranean Science and Engineering Congeress, 25 - 27 Kasım 2017, (Özet Bildiri)

57. Recent studies on hydrogen usage in rotary SI engine

ÖZCANLI M., BAŞ O., AKAR M. A., YILDIZHAN Ş., SERİN H.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017)., Adana, Türkiye, 25 - 27 Ekim 2017, ss.2279, (Özet Bildiri)

58. Hydrogen enriched waste oil biodiesel usage in compression ignition engine

AKAR M. A., Kekilli E., BAŞ O., YILDIZHAN Ş., SERİN H., ÖZCANLI M.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017)., Adana, Türkiye, 25 - 27 Ekim 2017, ss.2278, (Özet Bildiri)

59. Flow Characteristics of vertical Spliter Plate Used Side by Side Cylinder with differenet gap ratio

AKAR M. A., AKILLI H., BAŞ O., OĞUZ B., PINAR E., ŞAHİN B.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017) October 25-27, Adana, Türkiye, 25 Ekim 2017, (Özet Bildiri)

60. Hydrogen Enriched Waste Oil Biodiesel Usage In Compression Ignition Engine

AKAR M. A., Kekilli E., BAŞ O., YILDIZHAN Ş., SERİN H., ÖZCANLI M.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, ss.2278, (Özet Bildiri)

61. Effect of Hydrogen Enriched Nigella Sativa Oil Biodiesel on Performance and Emissions

SERİN H., YILDIZHAN Ş., BAŞ O., AKAR M. A., ÖZCANLI M.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, ss.2277, (Özet Bildiri)

62. Energy and exergy analysis of biodiesel

ÖZCANLI M., SERİN H., Calik A., ÇELEBİ K., AKAR M. A.

European Biotechnology Congress, Dubrovnik, Hırvatistan, 25 - 27 Mayıs 2017, cilt.256, (Özet Bildiri)

63. Comparison of transesterification and thermal cracking methods on fuel specifications of castor oil biodiesel

SERİN H., AKAR M. A., YILDIZHAN Ş., Ekinci F., ÖZCANLI M.

European Biotechnology Congress, Dubrovnik, Hırvatistan, 25 - 27 Mayıs 2017, cilt.256, (Özet Bildiri)

64. A review on performance and emission characteristics of biodiesel produced from animal fat

AKAR M. A., ÖZCANLI M., BAŞ O., KESKİN A., SERİN H.

European Biotechnology Congress, Dubrovnik, Hırvatistan, 25 - 27 Mayıs 2017, cilt.256, (Özet Bildiri)

65. VORTEX SHEDDING CONTROL BEHIND SIDE BY SIDE CIRCULAR CYLINDERS WITH VERTICAL SPLITTER PLATE IN SHALLOW WATER

AKAR M. A., AKILLI H., BAŞ O., PINAR E., Oğuz B., ŞAHİN B.

International Conference for Academic Disciplines (IJAS-Sicily 2017), Katanya, İtalya, 29 Mayıs - 01 Haziran 2017, cilt.10, sa.2, ss.249-250, (Özet Bildiri)

66. Pasif kontrollü silindir arkasında meydana gelen akışın frekans ölçümlerinin yapılması

AKAR M. A., BAŞ O., KÜÇÜK M.

1st International Mediterranean Science and Engineering Congress, Türkiye, 26 - 28 Ekim 2016, (Tam Metin Bildiri)

67. Yalın bir silindir etrafına yerleştirilen altıgen delikli dış silindir arkasındaki hız bölgesinin incelenmesi

AKAR M. A., BAŞ O., KÜÇÜK M.

1st International Mediterranean Science and Engineering Congress, Türkiye, 26 - 28 Ekim 2016, (Tam Metin Bildiri)

68. Scr sisteminde hidrokarbonların kullanımı

AKAR M. A., KESKİN Z.

1st International Mediterranean Science and Engineering Congress, Türkiye, 26 - 28 Ekim 2016, (Özet Bildiri)

69. Altıgen delikli silindirin geçirgenlik oranının silindir arkasındaki akış bölgesine etkisi

AKAR M. A., BAŞ O., KÜÇÜK M.

1st International Mediterranean Science and Engineering Congress, Türkiye, 26 - 28 Ekim 2016, (Özet Bildiri)

70. Using HHO (hydroxy) and hydrogen enriched castor oil biodiesel in compression ignition engine

ÖZCANLI M., AKAR M. A., Çalık A., SERİN H.

1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.19, (Özet Bildiri)

71. Performance and exhaust emissions of diesel engine fueled with Fusel Oil

AKAR M. A., YILMAZ A., BAŞ O., KESKİN A.

European Biotechnology Conference, Letonya, 5 - 07 Mayıs 2016, cilt.231, (Özet Bildiri)

72. Methodological effects of thermal cracking and transesterification on fuel specifications of false flax biodiesel

SERİN H., YILDIZHAN Ş., AKAR M. A., ÖZCANLI M.

European Biotechnology Conference, Letonya, 5 - 07 Mayıs 2016, cilt.231, (Özet Bildiri)

73. Investigation of alternative fuel properties of fusel oil

KESKİN A., YILDIZHAN Ş., Birbas A. I., AKAR M. A.

European Biotechnology Conference, Letonya, 5 - 07 Mayıs 2016, cilt.231, (Özet Bildiri)

74. Investigation of alternative fuel properties of fusel oil

Keskin A., Yildizhan Ş., Birbaş A. I., Akar M. A.

European biotechnology congres, Riga, Letonya, 5 - 07 Mayıs 2016, (Özet Bildiri)

75. The Effects of Geometric Variations of Shrouds on Vortex Shedding Suppression

AKAR M. A., BAŞ O.

8th International Ege Energy Syposium, Türkiye, 11 - 13 Mayıs 2016, (Tam Metin Bildiri)

76. Performance and exhaust emission of diesel engine fueled with fusel oil

AKAR M. A., YILMAZ A., BAŞ O., KESKİN A.

European biotechnology congres, Letonya, 5 - 07 Mayıs 2016

77. Performance and exhaust emissions of diesel engine fuelded with Fusel oil

AKAR M. A., YILMAZ A., BAŞ O.

European Biotechnology, 5 - 07 Mayıs 2016

78. Performance and exhaust emissions of diesel engine fueled with fusel

AKAR M. A., YILMAZ A., BAŞ O., KESKİN A.

European Biotechnology Conference (Latvia), 5 - 07 Mayıs 2016, (Özet Bildiri)

79. PERFORMANCE AND EMISSION CHARACTERISTICS OF VARIABLE COMPRESSION RATIO ENGINE FUELLED WITH DIESEL BUTANOL AND CORN BIODIESEL BUTANOL BLEND

AKAR M. A., YILDIZHAN Ş., SERİN H.

International Conference on Sustainable Development, 12 - 15 Kasım 2015, (Özet Bildiri)

80. Performance and Emission Characteristics of a Diesel Engine Fuelled with Tea Seed Oil Biodiesel with Variable Compression Ratio

SERİN H., ÖZCANLI M., AKAR M. A., ÖZALP C.

ICSD International Conference on Sustainable Development, 12 - 15 Kasım 2015 Sürdürülebilir Kalkınma

81. PERFORMANCE AND EMISSION CHARACTERISTICS OF VARIABLE COMPRESSION RATIO ENGINE FUELLED WITH DIESEL-BUTANOL AND CORN BIODIESEL-BUTANOL BLENDS

AKAR M. A., YILDIZHAN Ş., SERİN H., ÖZCANLI M.

ICSD International Conference on Sustainable Development, Belgrad, Sırbistan Ve Karadağ, 12 - 15 Kasım 2015, ss.2, (Tam Metin Bildiri)

82. The Effects of Splitter Plates on the Flow Characteristics of Circular Cylinders Arranged Side-By-Side in Shallow Wate

AKAR M. A., OĞUZ B., PINAR E., AKILLI H., ŞAHİN B.

7th International Ege Energy Symposium & Exhibition June 18-20, 2014, Uşak, Türkiye, 18 - 20 Haziran 2014, (Tam Metin Bildiri)

83. Sığ Suda Yan Yana Sıralı İki Silindir Arkasında Oluşan Girdabın Akışa Dik Yerleştirilen Plakalar ile Kontrol Edilmesi

AKAR M. A., OĞUZ B., AKILLI H., ŞAHİN B.

IV. Ulusal Havacılık ve Uzay Konferansı, Türkiye, 12 - 14 Eylül 2012, cilt.4, (Tam Metin Bildiri)

Diğer Yayınlar 1

1. YARIŞ ARABASI KANAT ÜRETİMİ İÇİN GERİ DÖNÜŞTÜRÜLEBİLEN KOMPOZİT KULLANIMI: YÜZEY PÜRÜZLÜLÜĞÜNÜN AERODİNAMİĞE ETKİSİ

Akar M. A., Karaçor B., Özcanlı M., Serin H.

Diğer, ss.55, 2019

Metrikler

Yayın

145

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

280

H-İndeks (WoS)

Atıf (Scopus)

387

H-İndeks (Scopus)

Proje

Açık Erişim

BM Sürdürülebilir Kalkınma Amaçları

Yayınlar & Eserler

Yayın

Yayın (WoS)

Yayın (Scopus)

Atıf (WoS)

H-İndeks (WoS)

Atıf (Scopus)

H-İndeks (Scopus)

Proje

Açık Erişim