Prof. NECDET GEREN

Publication Network

Articles 74

1. A Bio-Inspired Approach to Flexible Tubular Heat Exchanger Design for Wearable Medical Technology

Huerta O., Unver E., Binder J., GEREN N., BÜYÜKALACA O., GÜZELEL Y. E., et al.

Applied Sciences (Switzerland) , vol.16, no.9, 2026 (SCI-Expanded, Scopus) Sustainable Development

2. An Approach to Selection and Evaluation of Battery Enclosure Materials for Electric Vehicles

Gökciler O. C., Geren N.

International Journal of Automotive Science and Technology , vol.10, no.1, pp.64-75, 2026 (Scopus, TRDizin)

3. Optimisation of thermal management parameters in CFRP battery enclosure with embedded vascular channels

DİKER İ., ÖZKAN G. M., GÖKCİLER O. C., İBEKCİ M. B., ACER D. C., UZAY Ç., et al.

International Communications in Heat and Mass Transfer , vol.170, 2026 (SCI-Expanded, Scopus)

4. Novel microvascular channel method for developing self-healing functions of composite structures

Koştur E., Geren N., Demirel M. Ö.

COMPOSITES PART A: APPLIED SCIENCE AND MANUFACTURING , vol.199, no.12, pp.1-17, 2025 (SCI-Expanded, Scopus)

5. Effect of Fiber Architecture on the Physical and Mechanical Properties of Carbon Fiber-Reinforced Polymer Composites

Çetin A., UZAY Ç., GEREN N.

Arabian Journal for Science and Engineering , vol.50, no.22, pp.18925-18938, 2025 (SCI-Expanded, Scopus)

6. Stainless steel wire mesh hybridization for improved bending fatigue performance in fiber reinforced polymer sandwich structures

ACER D. C., GEREN N.

Polymer Composites , vol.46, no.S3, 2025 (SCI-Expanded, Scopus)

7. Enhancing Thermal Properties Of Fiber-Reinforced Polymer Composites To Be Used In Battery Casings: A Review

Gökciler O. C., Geren N.

KSÜ Mühendislik Bilimleri Dergisi , vol.27, no.4, pp.1633-1646, 2024 (TRDizin)

8. Evaluating the performance of Bi58Sn42 mold produced by material extrusion additive manufacturing system for agile manufacturing

Delibaş H., Geren N.

RAPID PROTOTYPING JOURNAL , vol.30, no.8, pp.1489-1501, 2024 (SCI-Expanded, Scopus)

9. Compressive Performance of the PVC Foam Materials used as Sandwich Panel Core

ÇETİN A., GEREN N.

Çukurova Üniversitesi Mühendislik Fakültesi dergisi , vol.39, no.2, pp.301-307, 2024 (TRDizin)

10. Predicting the tensile stiffness and strength properties of plain woven carbon fiber/epoxy laminates: a practical analytical approach and experimental validations

Uzay Ç., Çetin A., Geren N., Bayramoğlu M., Tütüncü N.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.31, no. 12, pp.2619-2634, 2024 (SCI-Expanded, Scopus)

11. Predicting the indentation load of FRP facesheet / foam core sandwiches

Çetin A., Uzay Ç., Tütüncü N., Geren N.

STRUCTURES , vol.62, 2024 (SCI-Expanded, Scopus)

12. A practical approach to predict the flexural properties of woven plain carbon fiber/epoxy laminates

Çetin A., Uzay Ç., Geren N., Bayramoğlu M., Tütüncü N.

MECHANICS OF ADVANCED MATERIALS AND STRUCTURES , vol.30, no.9, pp.1801-1811, 2023 (SCI-Expanded, Scopus) Sustainable Development

13. Volume fraction of retained austenite in 1.2842 tool steel as a function of tempering temperature

Günerli E., BAYRAMOĞLU M., GEREN N.

European Mechanical Science , vol.6, 2022 (TRDizin)

14. Physical and mechanical properties of laminar composites depending on the production methods: an experimental investigation

Uzay Ç., Çetin A., Geren N.

SADHANA - ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.47, no.4, pp.1-14, 2022 (SCI-Expanded, Scopus)

15. Automated sizing of automotive steering ball joints in parametric CAD environment using expert knowledge and feature-based computer-assisted 3D modelling

Geren N., Akcali O. O., Unver E., Allport J.

ADVANCED ENGINEERING INFORMATICS , vol.52, 2022 (SCI-Expanded, Scopus)

16. A method for the optimal design of low-density polymer foam core sandwiches using FEA and multiobjective optimization of design variables

Uzay Ç., Acer D. C., Geren N.

JOURNAL OF POLYMER ENGINEERING , vol.42, no.1, pp.75-84, 2022 (SCI-Expanded, Scopus)

17. Effect of substrate surface roughness on the wear of molybdenum disulphate coated rolling contact bearings

Gokce B., GEREN N., İZCİLER M.

MATERIALS TESTING , vol.63, no.9, pp.848-854, 2021 (SCI-Expanded, Scopus)

18. Hybrid Taguchi Based Grey Algorithm for Multi Objective Optimization of Gas Metal Arc Welded DP1000 Steel

Karataş M., BAYRAMOĞLU M., EŞME U., GEREN N.

European Mechanical Science , vol.5, no.4, pp.206-213, 2021 (TRDizin)

19. A proposal to improve the competence of students within the unnecessarily complex mechanical engineering design environment

GEREN N., UZAY Ç., BAYRAMOĞLU M.

INTERNATIONAL JOURNAL OF TECHNOLOGY AND DESIGN EDUCATION , vol.31, no.4, pp.741-770, 2021 (SCI-Expanded, SSCI, Scopus)

20. The effect of boron carbide additive on the low-velocity impact properties of low-density foam core composite sandwich structures

GEREN N., ACER D. C., Uzay C., BAYRAMOĞLU M.

POLYMER COMPOSITES , vol.42, no.4, pp.2037-2049, 2021 (SCI-Expanded, Scopus)

21. ADVANCED TECHNOLOGIES FOR FIBER REINFORCED POLYMERCOMPOSITE MANUFACTURING: A REVIEW

UZAY Ç., GEREN N.

Kahramanmaraş Sütçü İmam Üniversitesi Mühendislik Bilimleri Dergisi , vol.23, no.4, pp.236-248, 2020 (Peer-Reviewed Journal)

22. Ticari ve Askerî Elektronik Cihazlarda Kullanılan Yüzeye Montajlı Yeni Nesil Devre Elemanlarının Tamir Sürecindeki Etkili Faktörler

GEREN N., Çakırca M.

Savunma Bilimleri Dergisi , vol.1, no.38, pp.211-243, 2020 (TRDizin)

23. Effect of stainless-steel wire mesh embedded into fibre-reinforced polymer facings on flexural characteristics of sandwich structures

UZAY Ç., GEREN N.

Journal of Reinforced Plastics and Composites , vol.39, pp.613-633, 2020 (SCI-Expanded, Scopus)

24. Failure Analysis of Low-density Polymer Foam Core Sandwich Structures under Three-point Bending Loading

UZAY Ç., GEREN N.

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , vol.35, no.3, pp.813-820, 2020 (TRDizin)

25. Alternatif FML Kompozitler için Titanyum ve Elyaf/Epoksi Ara Yüzey Dayanımının İncelenmesi

BOZTEPE M. H., BAYRAMOĞLU M., UZAY Ç., GEREN N.

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , vol.35, no.3, pp.813-820, 2020 (TRDizin)

26. Characterization of boronized AISI 1050 steel and optimization of process parameters

BOZTEPE M. H., BAYRAMOĞLU M., UZAY Ç., Dagsuyu C., KOKANGÜL A., GEREN N.

MATERIALS TESTING , vol.61, no.6, pp.549-553, 2019 (SCI-Expanded, Scopus) Sustainable Development

27. Bending behavior of sandwich structures with different fiber facing types and extremely low-density foam cores

Uzay Ç., Geren N., Bortepe M. H., Bayramoğlu M.

MATERIALS TESTING , vol.61, pp.220-230, 2019 (SCI-Expanded, Scopus)

28. Impact Strength of Interply and Intraply Hybrid Laminates Based on Carbon-Aramid/Epoxy Composites

UZAY Ç., ACER D. C., GEREN N.

European Mechanical Science , vol.3, no.1, pp.1-5, 2019 (TRDizin)

29. Design of Composite Sandwich Chassis and Application to Urban Concept Electric Vehicles

UZAY Ç., ACER D. C., GEREN N., AKILLI H.

International Journal of Mechanical and Production Engineering (IJMPE) , vol.6, no.9, pp.41-45, 2018 (Scopus)

30. Mechanical engineering and issues on teaching mechanical engineering design in Turkey

GEREN N., UZAY Ç., BAYRAMOĞLU M.

INTERNATIONAL JOURNAL OF TECHNOLOGY AND DESIGN EDUCATION , vol.28, no.3, pp.843-866, 2018 (SCI-Expanded, Scopus)

31. Evaluation of Flexural Stiffness for the Lightweight Polymer Foam Core Sandwich Structures

UZAY Ç., ACER D. C., GEREN N., ÇETİN A.

International Journal of Mechanical and Production Engineering (IJMPE) , vol.6, no.9, pp.36-40, 2018 (Peer-Reviewed Journal)

32. Advanced Material Selection Technique For High Strength and Lightweight Spur Gear Design

Geren N., Uzay Ç.

European Mechanical Science , vol.1, no.4, pp.133-140, 2017 (TRDizin)

33. Intelligent Use of ISO and AGMA Gear Standards for Cost Effective Spur Gear Design

UZAY Ç., GEREN N.

Mühendislik Bilimleri ve Tasarım Dergisi , vol.5, no.3, pp.643-655, 2017 (TRDizin)

34. Improving the Adhesion Bonding Strength for FML Composites by Using a Extremely Thin Mesh Steels

BOZTEPE M. H., BAYRAMOĞLU M., UZAY Ç., GEREN N.

European Mechanical Science , vol.1, no.4, pp.111-116, 2017 (TRDizin)

35. Introducing gear ratings and AGMA conversion factors for the steel spur gear design under bending fatigue

GEREN N., UZAY Ç., BAYRAMOĞLU M.

MATERIALS TESTING , vol.59, pp.1043-1053, 2017 (SCI-Expanded, Scopus)

36. Parametric design of automotive ball joint based on variable design methodology using knowledge and feature-based computer assisted 3D modelling

GEREN N., AKCALI O. O., BAYRAMOĞLU M.

ENGINEERING APPLICATIONS OF ARTIFICIAL INTELLIGENCE , vol.66, pp.87-103, 2017 (SCI-Expanded, Scopus)

37. Sandviç Malzeme Geliştirmede Polimer Köpük Çekirdek Kalınlığının Eğilme Dayanımına Etkisinin Deneysel olarak Araştırılması

GEREN N., UZAY Ç., BOZTEPE M. H., BAYRAMOĞLU M.

ÇUKUROVA ÜNİVERSİTESİ MÜHENDİSLİK MİMARLIK FAKÜLTESİ DERGİSİ , vol.32, no.2, pp.13-22, 2017 (TRDizin)

38. Effect of post-curing heat treatment on mechanical properties of fiber reinforced polymer (FRP) composites

Uzay Ç., Boztepe M. H., Bayramoğlu M., Geren N.

MATERIALS TESTING , vol.59, pp.366-372, 2017 (SCI-Expanded, Scopus)

39. Impact Energy Absorption Capacity of Fiber Reinforced Polymer Matrix (FRP) Composites

Uzay Ç., Boztepe M. H., Geren N.

International Journal of Arts & Sciences , vol.9, no.1, pp.211-220, 2016 (Peer-Reviewed Journal)

40. A comparison of modules by using two different gear design approaches,

Uzay Ç., Geren N.

Ç.Ü. Journal of Science and Engineering , vol.32, no.4, pp.47-56, 2015 (Peer-Reviewed Journal)

41. EVALUATION OF THE SURFACE ROUGHNESS AND GEOMETRIC ACCURACIES IN A DRILLING PROCESS USING THE TAGUCHI ANALYSIS

Kabakli E., BAYRAMOĞLU M., GEREN N.

MATERIALI IN TEHNOLOGIJE , vol.48, no.1, pp.91-98, 2014 (SCI-Expanded, Scopus)

42. Systematic mechanical design approach for a flexible printed circuit board assemblies (PCBA) rework cell: part II - conceptual design of soldering and desoldering system

GEREN N., SARIGUL C., BAYRAMOĞLU M.

SOLDERING & SURFACE MOUNT TECHNOLOGY , vol.24, no.3, pp.151-166, 2012 (SCI-Expanded, Scopus)

43. Systematic design process of cartoon separating machine

Delibaş H., GEREN N.

Ç.Ü. fen ve Mühendislik Bilimleri Dergisi , vol.28, no.5, pp.170-177, 2012 (Peer-Reviewed Journal)

44. Systematic mechanical design approach for a flexible printed circuit board assemblies (PCBA) rework cell: part I - generic mechanical design procedure

GEREN N., SARIGUL C., BAYRAMOĞLU M.

SOLDERING & SURFACE MOUNT TECHNOLOGY , vol.23, no.4, pp.244-256, 2011 (SCI-Expanded, Scopus)

45. The use of Composite Materials in Automotive Industry

Önşen M., Bayramoğlu M., Geren N.

Ç.Ü. Fen ve Mühendislik Bilimleri Dergisi , vol.24, no.2, pp.165-174, 2010 (Non Peer-Reviewed Journal)

46. MATHEMATICAL MODELING FOR PREDICTION AND OPTIMIZATION OF TIG WELDING POOL GEOMETRY

Esme U., KOKANGÜL A., BAYRAMOĞLU M., GEREN N.

METALURGIJA , vol.48, no.2, pp.109-112, 2009 (SCI-Expanded, Scopus)

47. Cost and performance evaluation of different surface treated dies for hot forging process

BAYRAMOĞLU M., POLAT H. H., GEREN N.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.205, pp.394-403, 2008 (SCI-Expanded, Scopus)

48. Statistical optimization of process parameters to obtain maximum thickness and brightness in chromium plating

BAYRAMOĞLU M., ONAT B., GEREN N.

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY , vol.203, pp.277-286, 2008 (SCI-Expanded, Scopus)

49. Improvement of a low-cost water jet machining intensifier using reverse engineering and redesign methodology

GEREN N., Bayramoglu M., ESME U.

JOURNAL OF ENGINEERING DESIGN , vol.18, no.1, pp.13-37, 2007 (SCI-Expanded, Scopus)

50. TÜBİTAK Sanayi Araştırma Geliştirme Projeleri Destekleme programı ve İlgili yönetmelikte yapılan Değişikler

GEREN N.

ADASO gazetesi , pp.11-17, 2006 (Non Peer-Reviewed Journal)

51. Design of a flexible assembly and remanufacturing cell for advanced SM components: selection of cell design concept based on reflow tools

GEREN N., CAKIRCA M., Bayramoglu M.

SOLDERING & SURFACE MOUNT TECHNOLOGY , vol.18, no.1, pp.29-43, 2006 (SCI-Expanded, Scopus)

52. Endüstriyel sistemlerde kullanılan elektronik kartların tamiri ve kart tamiri hakkında bilinmesi gerekenler

Geren N.

Metal ve Makine , no.155, pp.402-407, 2005 (Non Peer-Reviewed Journal)

53. Simplified design and manufacturing of high pressure components for a low-cost water jet intensifier using redesign methodology

GEREN N., Bayramoglu M., TUNC T.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , vol.21, no.6, pp.505-525, 2004 (SCI-Expanded, Scopus)

54. 3000 bar Çalışma Basınçlı Çift Etkili Basınç Yükseltici Tasarımı ve İmalatı

GEREN N., BAYRAMOĞLU M., Ayseven A., SARIGEÇİLİ M. İ.

Ç. Ü. Müh. Mimarlık Fakültesi Dergisi , pp.49-53, 2003 (Peer-Reviewed Journal)

55. Determination and comparison of surface mount component rework cycle times of manual and fully automated robotic rework stations for rework technology selection

Geren N.

IEEE TRANSACTIONS ON ELECTRONICS PACKAGING MANUFACTURING , vol.26, no.2, pp.123-132, 2003 (SCI-Expanded, Scopus)

56. Effects of welding parameters on the quality of resistance spot welded SAE 1010 steel sheet

Bayramoglu M., ESME U., GEREN N.

INTERNATIONAL JOURNAL OF MATERIALS & PRODUCT TECHNOLOGY , vol.19, no.5, pp.362-373, 2003 (SCI-Expanded, Scopus)

57. Metal Endüstrisinde Aşındırıcılı Su Jeti Kesme Sistemlerinin Kullanımı ve Kesim Karakteristikleri

GEREN N., TUNÇ T.

Makine ve Metal Teknolojisi , no.118, pp.71-76, 2001 (Peer-Reviewed Journal) Sustainable Development

58. Yapısal Farklılıklar İçeren Su Jeti Kesme Sistemlerinin En Uygununun Belirlenmesi

GEREN N., TUNÇ T.

Mühendis ve Makina , no.500, pp.42-49, 2001 (TRDizin)

59. Basınçlı Kap Tasarım Kodları ve Çatlak Analizi

Geren N., Tunç T.

Mühendis ve Makina , vol.40, no.479, pp.15-22, 1999 (TRDizin)

60. Cost and performance analysis of a robotic rework cell

Geren N., REDFORD A.

INTERNATIONAL JOURNAL OF PRODUCTION ECONOMICS , vol.58, no.2, pp.159-172, 1999 (SCI-Expanded, Scopus)

61. Equipment selection, integration and interfacing of a robotic PCBA component rework cell

Geren N., Lo E.

COMPUTER INTEGRATED MANUFACTURING SYSTEMS , vol.11, pp.77-89, 1998 (SCI-Expanded, Scopus)

62. Software architecture of a printed circuit board assembly (PCBA) robotic rework cell

Geren N., Chan C., Redford A.

COMPUTER INTEGRATED MANUFACTURING SYSTEMS , vol.10, no.4, pp.251-259, 1997 (SCI-Expanded, Scopus)

63. Scara Tipi Endüstriyel Robot Hareketlerinin Bilgisayar Destekli Programlarla Kontrolu

GEREN N., ERTÜRK M.

Makina Tasarım ve İmalat Dergisi , vol.3, no.3, pp.128-133, 1997 (Peer-Reviewed Journal)

64. The limits of automating electronic component rework

Geren N.

JOURNAL OF ELECTRONICS MANUFACTURING , vol.7, no.3, pp.225-238, 1997 (SCI-Expanded, Scopus)

65. Automated removal and replacement of through-hole components in robotic rework

GEREN N., Lo E.

IEEE transactions on components, packaging and manufacturing technology. Part C. Manufacturing , vol.20, no.3, pp.236-248, 1997 (Scopus)

66. Automated removal and replacement of surface mounted devices in electronic assembly

GEREN N.

IEEE transactions on components, packaging and manufacturing technology. Part C. Manufacturing , vol.20, no.3, pp.227-235, 1997 (Scopus)

67. Automated rework of printed circuit board assemblies: Methods and procedures

Geren N., Redford A.

INTERNATIONAL JOURNAL OF COMPUTER INTEGRATED MANUFACTURING , vol.9, no.1, pp.48-60, 1996 (SCI-Expanded, Scopus)

68. Sert Malzemelerde Su Jeti ile Kesme Teknolojisi

ŞAHİN B., GEREN N.

Makina ve Metal Teknolojisi Dergisi, , vol.39, pp.77-79, 1995 (Peer-Reviewed Journal)

69. NONCONTACT TEMPERATURE-MEASUREMENT IN SM COMPONENT REWORK

GEREN N.

JOURNAL OF ELECTRONICS MANUFACTURING , vol.5, no.2, pp.129-136, 1995 (SCI-Expanded)

70. Su Jeti ile Kesme Teknolojisi ve Endüstriyel Uygulamaları

GEREN N., ŞAHİN B.

Mühendis ve Makina Dergisi , vol.35, pp.424-428, 1995 (Peer-Reviewed Journal)

71. Solder paste dispensing in robotic SMD rework

Geren N., EKERE N.

Soldering and Surface Mount Technology , no.16, pp.21-25, 1994 (SCI-Expanded, Scopus)

72. The Significance of Desoldering and Resoldering Methods in Robotic Automated Rework

GEREN N., Redford A. H.

JOURNAL OF ELECTRONICS MANUFACTURING , vol.4, no.1, pp.41-51, 1994 (Peer-Reviewed Journal)

73. Computer-Integrated Automatic PCBA Rework

Geren N., Chan C., LO E.

Integrated Manufacturing Systems , vol.3, no.4, pp.38-43, 1992 (Scopus)

74. Karşıt Döner Silindirli Yerfıstığı Temizleme ve Sınıflandırma Makina Tasarımı

AKÇALI İ. D., GEREN N.

Ç.Ü. Müh. Mim. Fak. Dergisi , vol.2, no.1, pp.145-154, 1987 (Peer-Reviewed Journal)

Papers Presented at Peer-Reviewed Scientific Conferences 42

1. Thermal Management Of A Multi-Functional Battery Case

Diker İ., Gökciler O. C., Özkan G. M., Acer D. C., Çetin A., Geren N.

20th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION- UMTIK 2024, Ankara, Turkey, 14 - 17 August 2024, vol.1, pp.153-169, (Full Text)

2. A Lightweight Multifunctional Battery Case

Geren N., Gökciler O. C., İbekci M. B., Uzay Ç., Bayramoğlu M.

20th INTERNATIONAL CONFERENCE ON MACHINE DESIGN AND PRODUCTION- UMTIK 2024, Ankara, Turkey, 14 - 17 August 2024, vol.1, pp.365-379, (Full Text)

3. Qualitative Data-Driven Generative Design for Personalized Wearable Scalp Cooling Devices

Binder J., UNVER E., Olaosun D., GEREN N.

Proceedings of CAD’24, Eger, Hungary, July 8-10, 2024, 39-44, 2024 U-turn Press LLC, http://www.cad-conference.net, Eger, Hungary, 8 - 10 July 2024, pp.39-44, (Full Text)

4. 3D PRINTING OF LOW TEMPERATURE FUSIBLE METAL ALLOY IN FDM TYPE 3D PRINTER

Delibaş H., Geren N.

3rd International Congress on 3D Printing (Additive Manufacturing) Technologies and Digital Industry 2018, Antalya, Turkey, 19 - 21 April 2018, (Summary Text)

5. Investigating the Success of a New Systematic Product Design Approach on Example Designs

Geren N., Sarıgül Ç., Kavuzlu M. M.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Turkey, 25 - 27 October 2017, vol.1, pp.2346-2356, (Full Text)

6. Design and Optimization of a Wheel Hub for Lightweight Efficiency Challenge Vehicles

ACER D. C., UZAY Ç., GEREN N., AKILLI H.

International Advanced Researches Engineering Congress-2017, Osmaniye, Turkey, 16 - 18 November 2017, vol.1, pp.192-200, (Full Text)

7. Bending Behavior of Sandwich Structures Having Low Density PVC Foam Cores and ±450 Carbon/Epoxy Facings

UZAY Ç., GEREN N., BOZTEPE M. H., BAYRAMOĞLU M.

International Advanced Researches Engineering Congress-2017, Osmaniye, Turkey, 16 - 18 November 2017, vol.1, pp.165-172, (Full Text)

8. Advanced Material Selection Technique For High Strength and Lightweight Spur Gear Design

DELİBAŞ H., UZAY Ç., GEREN N.

IMSEC 2017, Adana, Turkey, 25 - 27 October 2017, (Summary Text)

9. Bending Behavior of Sandwich Structures Having Low Density PVC Foam Cores and ±45o Carbon/Epoxy Facings

Uzay Ç., Geren N., Boztepe M. H., Bayramoğlu M.

International Advanced Researches Engineering Congress-2017, Osmaniye, Turkey, 16 - 18 November 2017, (Full Text)

10. Improving the Adhesion Bonding Strength for FML Composites by Using Extremely Thin Mesh Steel

Boztepe M. H., Bayramoğlu M., Uzay Ç., Geren N.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Turkey, 25 - 27 October 2017, (Summary Text)

11. Impact Strength of Interply and Intraply Hybrid Laminates Based on Carbon-Aramid/Epoxy Composites

Uzay Ç., Acer D. C., Geren N.

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Turkey, 25 - 27 October 2017, (Full Text)

12. INVESTIGATION OF THE ADHESION BONDING CAPABILITY BETWEEN DIFFERENT METALS AND FRP COMPOSITE LAYERS

BOZTEPE M. H., BAYRAMOĞLU M., UZAY Ç., GEREN N.

ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017 – ICPAS 2017, 4 - 06 January 2017, (Full Text)

13. MANUFACTURING OF LIGHT WEIGHT SANDWICH STRUCTURES BY USING POLYMER FOAM CORE

UZAY Ç., GEREN N., BOZTEPE M. H., BAYRAMOĞLU M.

ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017 – ICPAS 2017, 4 - 06 January 2017, (Full Text)

14. Manufacturing of Light Weigth Sandwich Structure by Using Polymer Foam Core

UZAY Ç., GEREN N., BOZTEPE M. H., BAYRAMOĞLU M.

Istanbul International Conference On Progres in Applied Science 2017 – ICPAS 2017, İstanbul, Turkey, 4 - 06 January 2017, vol.1, pp.1-6, (Full Text)

15. MANUFACTURING OF LIGHT WEIGTH SANDWICH STRUCTURES BY USINGPOLYMER FOAM CORE

Uzay Ç., Geren N., Boztepe M. H., Bayramoğlu M.

ISTANBUL INTERNATIONAL CONFERENCE ON PROGRES IN APPLIED SCIENCE 2017 ? ICPAS 2017, İstanbul, Turkey, 4 - 06 January 2017, vol.1, no.1, pp.1-6, (Full Text)

16. A TRANSLATION TECHNIQUE: DIMENSIONLESS RATINGS AND CONVERSION FACTORS BETWEEN ISO AND AGMA GEAR STANDARDS

Geren N., Uzay Ç.

ASME International Mechanical Engineering Congress and Exposition (IMECE2016), Arizona, United States Of America, 11 - 17 November 2016, (Full Text)

17. Significant ınfluence of rating the spur gear design results obtained from ıso and agma standards

Uzay Ç., Geren N., Çetin A.

1st International MediterraneanSCIENCE AND ENGINEERING CONGRESS, Adana, Turkey, 26 - 28 October 2016, (Full Text)

18. Adhesion Surface Bonding Capability of Different Metal Sheets for Fiber Metal Laminate FML Applications

Uzay Ç., Boztepe M. H., Bayramoğlu M., Geren N.

1st International Mediterranean Science and Engineering Congress, Adana, Turkey, 26 - 28 October 2016, (Full Text)

19. Significant Influence of Rating the Spur Gear Design Results Obtained from ISO and AGMA Standards

Uzay Ç., Geren N., Çetin A.

1st International Mediterranean Science and Engineering Congress, Adana, Turkey, 26 - 28 October 2016, pp.3864-3870, (Full Text)

20. METHOD FOR RATING AND CONVERTING TEXT BOOK SPUR GEAR DESIGN RESULTS TO ISO GEAR STANDARDS

Uzay Ç., Geren N.

The 17th International Conference on Machine Design and Production, Bursa, Turkey, 12 - 15 July 2016, (Full Text)

21. Impact Energy Absorption Capacity of Fiber Reinforced Polymer Matrix FRP Composites

Uzay Ç., Boztepe M. H., Geren N.

Conference of the International Journals of Arts & Sciences, Paris, France, 11 - 14 April 2016, vol.1, pp.211-220, (Full Text)

22. OPTIMUM MATERIAL SELECTION FOR WATER-JET INTENSIFIER

Sarıgeçili M. İ., Geren N.

15th International Materials Symposium (IMSP?2014), Denizli, Turkey, 15 - 17 October 2014, pp.800-810, (Full Text)

23. Üniversite Sanayi etkileşimi için oluşturulan kurumsal ve model mekanizmalar Bir karşılaştırma

Sezer Ç., İŞLER A., Balcı H., Arıcan E., GEREN N.

USİS 2007, Üniversite-sanayi İşbirliği Sempozyumu, Ana Tema: Yenilik, Patent, Marka ve Rekabet stratejileri, Sakarya, Turkey, 5 - 07 June 2007, vol.1, pp.304-314, (Full Text)

24. TÜBİTAK Adana Üniversite Sanayi Ortak Araştırma Merkezinde Yaratılan Değerler

GEREN N.

TMMOB Tekstil Mühendisleri Odası Adana Şubesi ve TÜBİTAK Adana ÜSAM, Adana, Turkey, 31 October 2006, vol.1, pp.2-7, (Full Text)

25. TIG KAYNAGINDA KAYNAK DAYANIMININ TAGUCH METODUYLAOPTMZASYONU

EŞME U., BAYRAMOĞLU M., GEREN N., SERİN H.

TMAK-Tasarım malat Analiz Kongresi, Turkey, 26 - 28 April 2006, pp.335-343, (Full Text)

26. TIG Kaynağında Kaynak Dayanımının Taguchi Metoduyla Optimizasyonu

Eşme U., BAYRAMOĞLU M., GEREN N., SERİN H.

TİMAK-Tasarım İmalat Analizi Kongresi, Balıkesir, Turkey, 26 - 28 April 2006, pp.335-343, (Full Text)

27. Direnç Nokta Kaynağında Kaynak Parametrelerinin Taguchi Metoduyla Analizi

Eşme U., BAYRAMOĞLU M., GEREN N., SERİN H.

11th International Materials Symposium, Denizli, Turkey, 19 - 21 April 2006, pp.24-28, (Full Text)

28. TIG Kaynağındaki Elektrot Uç Geometrisinin Kaynak Havuz Şekline Etkileri

Eşme U., BAYRAMOĞLU M., GEREN N., SERİN H.

Kaynak Teknolojisi V. Ulusal Kongresi1, Kocaeli, Turkey, 11 - 12 November 2005, pp.1-7, (Full Text)

29. Tıbbi Alet İmalatında Paslanmaz Çelik Kullanımı

EŞME U., BAYRAMOĞLU M., GEREN N.

I. Ulusal Tıbbi Cihazlar İmalatı Sanayi Kongre ve Sergisi, TMMOB Makina Mühendisleri Odası, Samsun, Turkey, 30 September - 02 October 2005, vol.1, (Full Text)

30. Direnç Nokta Kaynağında Elektrot Baskı Kuvveti ve Uç Geometrisinin Temas Direncine Etkileri

EŞME U., BAYRAMOĞLU M., GEREN N.

TMMOB Makina Mühendisleri Odası Konya Şubesi, III. Makina Tasarım ve İmalat Teknolojileri Kongresi, Konya, Turkey, 16 - 17 September 2005, vol.1, pp.311-319, (Full Text)