Yayınlar & Eserler

Yayın Ağı
Makaleler 14
Tümü (14)
SCI-E, SSCI, AHCI (8)
SCI-E, SSCI, AHCI, ESCI (8)
Scopus (6)
TRDizin (6)

1. Effect of Extensometer Usage on Obtaining the Force-Displacement Curve of the Adhesively Single Lap Joint

ÇALIK A., AKPINAR S.
European Mechanical Science , cilt.3, sa.4, ss.142-146, 2019 (TRDizin)

2. Estimation of depth-dependent material properties of biphasic soft tissues through finite element optimization and sensitivity analysis

ÜN M. K., ÇALIK A.
MEDICAL ENGINEERING & PHYSICS , cilt.74, ss.73-81, 2019 (SCI-Expanded)

3. Artificial intelligence techniques for the vibration, noise, and emission characteristics of a hydrogen-enriched diesel engine

YILDIRIM S., TOSUN E., ÇALIK A., ULUOCAK İ., AVŞAR E.
ENERGY SOURCES, PART A: RECOVERY, UTILIZATION,ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , cilt.41, sa.18, ss.2194-2206, 2019 (SCI-Expanded)

4. İnovasyon, İcat, Teknoloji ve Bilim Kavramları Üzerine

GÜNAY D., ÇALIK A.
Üniversite Araştırmaları Dergisi , 2019 (TRDizin)

5. Hidrojen ile Yakıt Zenginleştirmenin Dizel Motorun Motor Performansı ve Emisyon Özelliklerine Etkisi

ÇALIK A.
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.33, sa.3, ss.255-262, 2018 (TRDizin)

6. Pamuk yağı Biyodizelinin motor ses seviyesine olan etkilerinin incelenmesi

ÇALIK A.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.32, sa.4, ss.147-152, 2017 (TRDizin)

7. Investigation of Stress and Displacement Distribution in Advanced Steel Rims

DEDE G., YILDIZHAN Ş., ÖKTEN K., ÇALIK A., ULUDAMAR E., ÖZCANLI M.
International Journal of Automotive Engineering and Technologies , ss.34-37, 2017 (Hakemli Dergi)

8. Evaluation of vibration characteristics of a hydroxyl (HHO) gas generator installed diesel engine fuelled with different diesel-biodiesel blends

Uludamar E., TOSUN E., Tuccar G., YILDIZHAN Ş., Calik A., YILDIRIM S., et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.42, sa.36, ss.23352-23360, 2017 (SCI-Expanded) identifier identifier

9. Using HHO (Hydroxy) and hydrogen enriched castor oil biodiesel in compression ignition engine

ÖZCANLI M., AKAR M. A., Calik A., SERİN H.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , cilt.42, sa.36, ss.23366-23372, 2017 (SCI-Expanded, Scopus) identifier identifier

10. Fuel properties, performance and emission characterization of waste cooking oil (WCO) in a variable compression ratio (VCR) diesel engine

Yıldızhan Ş., Uludamar E., Çalık A., Dede G., Özcanlı M.
European Mechanical Science , cilt.1, sa.2, ss.56-62, 2017 (TRDizin)

11. Effect of adherend recessing on bi-adhesively bonded single-lap joints with spew fillet

Calik A., YILDIRIM S.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , cilt.42, sa.3, ss.317-325, 2017 (SCI-Expanded) Creative Commons License identifier identifier

12. Failure load prediction of single lap adhesive joints using artificial neural networks

TOSUN E., ÇALIK A.
ALEXANDRIA ENGINEERING JOURNAL , cilt.55, sa.2, ss.1341-1346, 2016 (SCI-Expanded, Scopus) identifier identifier

13. Relevance of inhomogeneous-anisotropic models of human cortical bone: a tibia study using the finite element method

Un K., ÇALIK A.
BIOTECHNOLOGY & BIOTECHNOLOGICAL EQUIPMENT , cilt.30, sa.3, ss.538-547, 2016 (SCI-Expanded, Scopus) Creative Commons License identifier identifier

14. An investigation on the effect of parallel slot in bi-adhesive single lap joints with spew fillet

ÇALIK A., YILDIRIM S.
JOURNAL OF ENGINEERING RESEARCH , cilt.3, sa.4, ss.95-110, 2015 (SCI-Expanded, Scopus) identifier identifier
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 18

1. Innovative Use of Textile Waste for Automotive Applications

ÖZCANLI M., KARAÇOR B., ZERVENT ÜNAL B., ÇALIK A.
10 th International Scientific Conference on Advances in Mechanical Engineering (ISCAME 2024), Debrecen, Macaristan, 7 - 09 Kasım 2024, (Özet Bildiri)

2. Influences of Iron Oxide Nanomaterial and Hydrogen Addition into Sunflower Biodiesel/Diesel Powered Diesel Engine Performance and Emissions

ÖZCANLI M., TOSUN E., ÇALIK A.
5th International Conference on Design and Technologies for Polymeric and Composites Products (POLCOM), Bucharest, Romanya, 24 - 27 Kasım 2021, cilt.404, (Tam Metin Bildiri) identifier identifier

3. Çekmeye Maruz Köşeleri Yuvarlatılmış Basamaklı Bindirme Bağlantısının Gerilme Analizi

ÇALIK A., ÖZER H.
3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), 24 - 26 Ekim 2018, (Tam Metin Bildiri)

4. Finite Element Optimization for Estimating Inhomogeneous Material Properties of Biphasic Soft Tissues

ÇALIK A., ÜN M. K.
9th International Biomechanics Congress, Eskişehir, Türkiye, 12 - 22 Eylül 2018, ss.448-451, (Tam Metin Bildiri)

5. Prediction of in-cylinder pressure in biodiesel-diesel operated diesel engine by use of artificial neural network

ÇALIK A.
International Conference on Science, Technology, Engineering and Management (ICSTEM), Paris, Fransa, 25 - 26 Ağustos 2018, (Özet Bildiri)

6. A Numerical Investigated of Human Femur During Gait and Running

ÇALIK A.
17th International Eastern Mediterranean Family Medicine Congress, Türkiye, 10 - 13 Mayıs 2018, ss.1003, (Özet Bildiri)

7. Bo-composte materals: a revew of recent trends, mechancal and chemcal propertes, and applcatons

YILDIZHAN Ş., ÇALIK A., ÖZCANLI M., SERİN H.
2nd Interna onal Mediterranean Science and Engineering Congress (IMSEC 2017), 25 - 27 Ekim 2017, ss.198-1198, (Özet Bildiri)

8. Comparison of diesel fuel atomization characteristics of hydrogen gas and air in a specal injection device

TÜCCAR G., YILDIRIM S., ÇALIK A., ULUDAMAR E., SERİN H., ÖZCANLI M., et al.
2nd International Mediterranean SCIENCE AND ENGINEERING CONGRESS, 25 - 27 Ekim 2017, (Özet Bildiri)

9. İki Yapışkanlı Bindirme Bağlantının Serbest Titreşim Analizi

ÇALIK A.
2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), 25 - 27 Ekim 2017, ss.996, (Özet Bildiri)

10. Comparison of diesel fuel atomization characteristics of hydrogen gas and air in a special injection device

TÜCCAR G., YILDIRIM S., ÇALIK A., Uludamar E., SERİN H., ÖZCANLI M., et al.
2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, ss.1321, (Özet Bildiri)

11. Energy and exergy analysis of biodiesel

ÖZCANLI M., SERİN H., Calik A., ÇELEBİ K., AKAR M. A.
European Biotechnology Congress, Dubrovnik, Hırvatistan, 25 - 27 Mayıs 2017, cilt.256, (Özet Bildiri) identifier

12. Finite Element Optimization for Estimating the Depth-dependent Material Propertiesof Biphasic Soft Tİssue

ÜN M. K., ÇALIK A.
23 Congress of European Society of Biomechanics, Sevilla, İspanya, 2 - 05 Temmuz 2017, (Tam Metin Bildiri)

13. Finite element optimization for estimating depth-dependent material properties of biphasic soft tissues

ÜN M. K., ÇALIK A.
The 23rd Congress of the European Society of Biomechanics, Sevilla, İspanya, 2 - 05 Temmuz 2017, (Özet Bildiri)

14. Fuel properties, performance and emission characterization of waste cooking oil (WCO) in a variable compression ratio (VCR) diesel engine

YILDIZHAN Ş., ULUDAMAR E., ÇALIK A., Dede G., ÖZCANLI M.
1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.2658-2665, (Tam Metin Bildiri)

15. Investigation of stress and displacement distribution in advanced steel rims

Dede G., YILDIZHAN Ş., Kökten K., ÇALIK A., ULUDAMAR E., ÖZCANLI M.
1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.2899, (Özet Bildiri)

16. Compression ratio effect on performance and emissions of a diesel engine fuelled with plastic oil and diesel fuel

YILDIZHAN Ş., ÇALIK A., ÖZCANLI M., SERİN H.
1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Türkiye, 26 Ekim - 28 Aralık 2016, ss.2087, (Tam Metin Bildiri)

17. A Numerical Study of Adherend Geometry on the Stress Distribution in Adhesively Lap Joint

ÇALIK A.
International Conference on Natural Science and Engineering (ICNASE’16), Kilis, Türkiye, 19 - 20 Mart 2016, ss.383-388, (Tam Metin Bildiri)

18. Comparison of Isotropic and Inhomogeneus-Anisotropic Models of Cortical Bone: A Tibia Example using the Finite Element Method

ÜN M. K., ÇALIK A.
The 7th Asian Pacific Conference on Biomechanics, Seol, Güney Kore, 28 - 31 Ağustos 2013, ss.52, (Özet Bildiri)
Diğer Yayınlar 1

1. Preface to the special issue section on ?International Mediterranean Science and Engineering Congress (IMSEC 2017), 25?27 October 2017, Adana, Turkey?

ÖZCANLI M., SERİN H., ÇALIK A.
Diğer, ss.17969, 2018
Metrikler

Yayın

33

Yayın (WoS)

10

Yayın (Scopus)

7

Atıf (WoS)

118

H-İndeks (WoS)

5

Atıf (Scopus)

163

H-İndeks (Scopus)

4

Proje

2

Açık Erişim

2