Publications & Works

Publication Network

Published journal articles indexed by SCI, SSCI, and AHCI

Estimation of depth-dependent material properties of biphasic soft tissues through finite element optimization and sensitivity analysis

ÜN M. K., ÇALIK A.
MEDICAL ENGINEERING & PHYSICS , vol.74, pp.73-81, 2019 (SCI-Expanded)

Artificial intelligence techniques for the vibration, noise, and emission characteristics of a hydrogen-enriched diesel engine

YILDIRIM S., TOSUN E., ÇALIK A., ULUOCAK İ., AVŞAR E.
ENERGY SOURCES, PART A: RECOVERY, UTILIZATION,ENERGY SOURCES PART A-RECOVERY UTILIZATION AND ENVIRONMENTAL EFFECTS , vol.41, no.18, pp.2194-2206, 2019 (SCI-Expanded)

Using HHO (Hydroxy) and hydrogen enriched castor oil biodiesel in compression ignition engine

ÖZCANLI M., AKAR M. A., Calik A., SERİN H.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , vol.42, no.36, pp.23366-23372, 2017 (SCI-Expanded) identifier identifier

Evaluation of vibration characteristics of a hydroxyl (HHO) gas generator installed diesel engine fuelled with different diesel-biodiesel blends

Uludamar E., TOSUN E., Tuccar G., YILDIZHAN Ş., Calik A., YILDIRIM S., et al.
INTERNATIONAL JOURNAL OF HYDROGEN ENERGY , vol.42, no.36, pp.23352-23360, 2017 (SCI-Expanded) identifier identifier

Effect of adherend recessing on bi-adhesively bonded single-lap joints with spew fillet

Calik A., YILDIRIM S.
SADHANA-ACADEMY PROCEEDINGS IN ENGINEERING SCIENCES , vol.42, no.3, pp.317-325, 2017 (SCI-Expanded) Creative Commons License identifier identifier

Failure load prediction of single lap adhesive joints using artificial neural networks

TOSUN E., ÇALIK A.
ALEXANDRIA ENGINEERING JOURNAL , vol.55, no.2, pp.1341-1346, 2016 (SCI-Expanded) identifier identifier

Relevance of inhomogeneous-anisotropic models of human cortical bone: a tibia study using the finite element method

Un K., ÇALIK A.
BIOTECHNOLOGY & BIOTECHNOLOGICAL EQUIPMENT , vol.30, no.3, pp.538-547, 2016 (SCI-Expanded) Creative Commons License identifier identifier

An investigation on the effect of parallel slot in bi-adhesive single lap joints with spew fillet

ÇALIK A., YILDIRIM S.
JOURNAL OF ENGINEERING RESEARCH , vol.3, no.4, pp.95-110, 2015 (SCI-Expanded) identifier identifier

Articles Published in Other Journals

Effect of Extensometer Usage on Obtaining the Force-Displacement Curve of the Adhesively Single Lap Joint

ÇALIK A., AKPINAR S.
European Mechanical Science , vol.3, no.4, pp.142-146, 2019 (Peer-Reviewed Journal)

İnovasyon, İcat, Teknoloji ve Bilim Kavramları Üzerine

GÜNAY D., ÇALIK A.
Üniversite Araştırmaları Dergisi , 2019 (Peer-Reviewed Journal)

Hidrojen ile Yakıt Zenginleştirmenin Dizel Motorun Motor Performansı ve Emisyon Özelliklerine Etkisi

ÇALIK A.
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , vol.33, no.3, pp.255-262, 2018 (Peer-Reviewed Journal)

Pamuk yağı Biyodizelinin motor ses seviyesine olan etkilerinin incelenmesi

ÇALIK A.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , vol.32, no.4, pp.147-152, 2017 (Peer-Reviewed Journal)

Investigation of Stress and Displacement Distribution in Advanced Steel Rims

DEDE G., YILDIZHAN Ş., ÖKTEN K., ÇALIK A., ULUDAMAR E., ÖZCANLI M.
International Journal of Automotive Engineering and Technologies , pp.34-37, 2017 (Peer-Reviewed Journal)

Fuel properties, performance and emission characterization of waste cooking oil (WCO) in a variable compression ratio (VCR) diesel engine

YILDIZHAN Ş., ULUDAMAR E., ÇALIK A., DEDE G., ÖZCANLI M.
European Mechanical Science , vol.1, no.2, pp.56-62, 2017 (Peer-Reviewed Journal)

Refereed Congress / Symposium Publications in Proceedings

Influences of Iron Oxide Nanomaterial and Hydrogen Addition into Sunflower Biodiesel/Diesel Powered Diesel Engine Performance and Emissions

ÖZCANLI M., TOSUN E., ÇALIK A.
5th International Conference on Design and Technologies for Polymeric and Composites Products (POLCOM), Bucharest, Romania, 24 - 27 November 2021, vol.404 identifier identifier

Çekmeye Maruz Köşeleri Yuvarlatılmış Basamaklı Bindirme Bağlantısının Gerilme Analizi

ÇALIK A., ÖZER H.
3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), 24 - 26 October 2018

Finite Element Optimization for Estimating Inhomogeneous Material Properties of Biphasic Soft Tissues

ÇALIK A., ÜN M. K.
9th International Biomechanics Congress, Eskişehir, Turkey, 12 - 22 September 2018, pp.448-451

Prediction of in-cylinder pressure in biodiesel-diesel operated diesel engine by use of artificial neural network

ÇALIK A.
International Conference on Science, Technology, Engineering and Management (ICSTEM), Paris, France, 25 - 26 August 2018

A Numerical Investigated of Human Femur During Gait and Running

ÇALIK A.
17th International Eastern Mediterranean Family Medicine Congress, Turkey, 10 - 13 May 2018, pp.1003

Bo-composte materals: a revew of recent trends, mechancal and chemcal propertes, and applcatons

YILDIZHAN Ş., ÇALIK A., ÖZCANLI M., SERİN H.
2nd Interna onal Mediterranean Science and Engineering Congress (IMSEC 2017), 25 - 27 October 2017, pp.198-1198

Comparison of diesel fuel atomization characteristics of hydrogen gas and air in a specal injection device

TÜCCAR G., YILDIRIM S., ÇALIK A., ULUDAMAR E., SERİN H., ÖZCANLI M., et al.
2nd International Mediterranean SCIENCE AND ENGINEERING CONGRESS, 25 - 27 October 2017

İki Yapışkanlı Bindirme Bağlantının Serbest Titreşim Analizi

ÇALIK A.
2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), 25 - 27 October 2017, pp.996

Comparison of diesel fuel atomization characteristics of hydrogen gas and air in a special injection device

TÜCCAR G., YILDIRIM S., ÇALIK A., Uludamar E., SERİN H., ÖZCANLI M., et al.
2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Turkey, 25 - 27 October 2017, pp.1321

Energy and exergy analysis of biodiesel

ÖZCANLI M., SERİN H., Calik A., ÇELEBİ K., AKAR M. A.
European Biotechnology Congress, Dubrovnik, Croatia, 25 - 27 May 2017, vol.256 identifier

Finite Element Optimization for Estimating the Depth-dependent Material Propertiesof Biphasic Soft Tİssue

ÜN M. K., ÇALIK A.
23 Congress of European Society of Biomechanics, Sevilla, Spain, 2 - 05 July 2017

Finite element optimization for estimating depth-dependent material properties of biphasic soft tissues

ÜN M. K., ÇALIK A.
The 23rd Congress of the European Society of Biomechanics, Sevilla, Spain, 2 - 05 July 2017

Fuel properties, performance and emission characterization of waste cooking oil (WCO) in a variable compression ratio (VCR) diesel engine

YILDIZHAN Ş., ULUDAMAR E., ÇALIK A., Dede G., ÖZCANLI M.
1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Turkey, 26 - 28 October 2016, pp.2658-2665

Investigation of stress and displacement distribution in advanced steel rims

Dede G., YILDIZHAN Ş., Kökten K., ÇALIK A., ULUDAMAR E., ÖZCANLI M.
1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Turkey, 26 - 28 October 2016, pp.2899

Compression ratio effect on performance and emissions of a diesel engine fuelled with plastic oil and diesel fuel

YILDIZHAN Ş., ÇALIK A., ÖZCANLI M., SERİN H.
1st International Mediterranean Science and Engineering Congress (IMSEC 2016), Adana, Turkey, 26 October - 28 December 2016, pp.2087

A Numerical Study of Adherend Geometry on the Stress Distribution in Adhesively Lap Joint

ÇALIK A.
International Conference on Natural Science and Engineering (ICNASE’16), Kilis, Turkey, 19 - 20 March 2016, pp.383-388

Comparison of Isotropic and Inhomogeneus-Anisotropic Models of Cortical Bone: A Tibia Example using the Finite Element Method

ÜN M. K., ÇALIK A.
The 7th Asian Pacific Conference on Biomechanics, Seol, South Korea, 28 - 31 August 2013, pp.52

Other Publications

Preface to the special issue section on ?International Mediterranean Science and Engineering Congress (IMSEC 2017), 25?27 October 2017, Adana, Turkey?

ÖZCANLI M., SERİN H., ÇALIK A.
Other, pp.17969, 2018

Metrics

Publication

32

Citation (WoS)

118

H-Index (WoS)

4

Citation (Scopus)

163

H-Index (Scopus)

4

Project

2

Open Access

2