Yayınlar & Eserler

Yayın Ağı
Makaleler 19
Tümü (19)
SCI-E, SSCI, AHCI (8)
SCI-E, SSCI, AHCI, ESCI (10)
ESCI (2)
Scopus (11)
TRDizin (8)

1. Crashworthiness analysis of vehicle side door support beams with different materials, thicknesses, and angles using the finite element method

KUMLU U., HÜKÜMDAR Ö., AKAR M. A., KESKİN A., Aykut M. A.
Materialpruefung/Materials Testing , cilt.68, sa.3, ss.412-424, 2026 (SCI-Expanded, Scopus)

2. Experimental and artificial neural network (ANN) method of microhardness and wear behaviour in Ni-P/AlN nanocomposite coatings

Hükümdar Ö., Keskin A., Kumlu U., Akar M. A., Yaşar A., Kılınççeker G.
Ceramics International , cilt.52, sa.6, ss.8071-8086, 2026 (SCI-Expanded, Scopus)

3. Characterization of Ni-W/hBN nanocomposite electrodeposits

Keskin A., Hukumdar O., Kumlu U., AKAR M. A., Tosun E., KEYİNCİ S.
CERAMICS INTERNATIONAL , cilt.51, sa.25, ss.44857-44871, 2025 (SCI-Expanded, Scopus)

4. Numerical crashworthiness analysis of improved elliptical cross-section straight and tapered thin-walled crashing boxes

Yildizhan S., Kumlu U., Akar M. A., Keskin A., Hukumdar Ö.
MECHANICS BASED DESIGN OF STRUCTURES AND MACHINES , cilt.53, sa.6, ss.4294-4311, 2025 (SCI-Expanded, Scopus)

5. Investigation of micro-perforated plate structure and cavity used as Helmholtz resonator in wheel arch liner

GULTEKIN Y., JEAN T., akar m., UMUT K.
European Mechanical Science , cilt.9, sa.1, ss.38-45, 2025 (TRDizin) Creative Commons License

6. Investigation of the effect of bath temperature on Ni-W/Al2O3 nanocomposite coatings produced by electrodeposition method

Aybacı Y., Yalyanç F., Kocabuğa F. N., Hükümdar Ö., Kumlu U., Keskin A., et al.
International Journal of Automotive Engineering and Technologies , cilt.14, sa.1, ss.47-55, 2025 (TRDizin)

7. Effect of TMAB and ZrC concentration on mechanical and morphological properties of Ni-B/ZrC composite electrodeposition

Hükümdar Ö., Kumlu U., Keskin A., Akar M. A.
MATERIALS TESTING , cilt.67, sa.1, ss.17-35, 2025 (SCI-Expanded, Scopus)

8. Effects of different production methods and hybridization on mechanical characteristics of basalt, flax, and jute fiber-reinforced composites

Kumlu U., Karacor B., Ozcanlı M.
MATERIALS TESTING , cilt.67, sa.1, ss.111-124, 2025 (SCI-Expanded, Scopus)

9. Investigation of the effect of current density and ZrO2 bath concentration on electrodeposited Ni-P/ZrO2 composite coatings

HÜKÜMDAR Ö., KUMLU U., KESKİN A., AKAR M. A., GEÇKİN M. F., ÇAMCI E. N., et al.
ENGINEERING SCIENCES , cilt.14, sa.1, ss.52-59, 2025 (TRDizin)

10. Examination of mechanical and morphological properties of jute/cotton natural fiber reinforced hybrid composites

Yıldızhan Ş., Tosun A. T., akar m., UMUT K.
PAMUKKALE UNIVERSITY JOURNAL OF ENGINEERING SCIENCES-PAMUKKALE UNIVERSITESI MUHENDISLIK BILIMLERI DERGISI , cilt.31, sa.1, ss.9-16, 2025 (ESCI, TRDizin)

11. Acoustic emission reduction in vehicles by using MPP structures in wheel ARCH liner structures

Gültekin Y., Jean T., Akar M. A., Kumlu U.
SIGMA JOURNAL OF ENGINEERING AND NATURAL SCIENCES , cilt.46, sa.6, ss.1749-1755, 2024 (ESCI, Scopus)

12. Ahmed Cisminde Çukurlu Yüzeyler Kullanmanın Akış Karakteristiklerine Etkisi

AYDIN V. K., AKAR M. A., BAŞ O., KUMLU U.
Osmaniye Korkut Ata Üniversitesi Fen Bilimleri Enstitüsü Dergisi (Online) , cilt.7, sa.3, ss.1358-1373, 2024 (TRDizin) Creative Commons License

13. Investigation of the under-vehicle plastic protection parts manufactured by core-back injection process in terms of strength and weight

GÜLTEKİN Y., AKAR M. A., ALTINDAĞ A., DURAN D., KUMLU U.
International Journal of Automotive Engineering and Technologies , cilt.12, sa.4, ss.133-143, 2023 (TRDizin)

14. Numerical investigation of crash behavior of vehicle side door beams under high-speed pole side impacts

AKAR M. A., Kumlu U., Yildizhan S.
PROCEEDINGS OF THE INSTITUTION OF MECHANICAL ENGINEERS PART D-JOURNAL OF AUTOMOBILE ENGINEERING , cilt.237, sa.14, ss.3408-3418, 2023 (SCI-Expanded, Scopus)

15. Hybrid jute/carbon fiber composites: optimum post-curing time

Karaçor B., Özcanlı M., Kumlu U.
IRANIAN POLYMER JOURNAL (ENGLISH EDITION) , cilt.32, sa.11, ss.1443-1454, 2023 (SCI-Expanded, Scopus)

16. Analysis of the wear and friction of brake pad added cashew and ulexite using ANSYS

Akar M. A., Sugözü İ., Bilgi G., Kumlu U.
International Journal of Automotive Engineering and Technologies , cilt.12, sa.3, ss.83-91, 2023 (TRDizin) Creative Commons License

17. Tensile and Morphological Properties of Waste Tire Rubber Granule/Polyester Polymer Matrix Composite

Yıldızhan Ş., Yel F., Akar M. A., Kumlu U.
Çukurova Üniversitesi Mühendislik Fakültesi dergisi , cilt.37, sa.3, ss.773-779, 2022 (TRDizin)

18. Potential of Using Agricultural Waste Composites as Thermal Insulation Material

Serin H., Güzel G., Kumlu U., Akar M. A.
Macromolecular Symposia , cilt.404, sa.1, ss.1-3, 2022 (Scopus)

19. The Usage of Natural Fibers for Automotive Applications

Akar M. A., Tosun A. T., Yel F., Kumlu U.
Macromolecular Symposia , cilt.404, sa.1, ss.1-3, 2022 (Scopus)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler 19

1. CRASHWORTHINESS OF VEHICLE INNER DOOR REINFORCEMENT BEAMS WITH DIFFERENT CROSS-SECTION AND BEAM ANGLES

ÖZAL İ., KUMLU U., HÜKÜMDAR Ö.
11th International Congress on Scientific Research, KİEV, Ukrayna, 25 - 26 Kasım 2025, (Tam Metin Bildiri)

2. EXAMINATION OF THE CRASHWORTHINESS PERFORMANCE OF NEW MODEL CRASHING BOXES WITH THREE DIFFERENT MATERIALS USING THE FINITE ELEMENT METHOD

GİZLİ K., KUMLU U., HÜKÜMDAR Ö.
11th International Congress on Scientific Research, KİEV, Ukrayna, 25 - 26 Kasım 2025, (Tam Metin Bildiri)

3. Influence of Section Geometry and Material Selection on Energy Absorption in Crash Boxes: A Finite Element Approach

Kumlu U., Hükümdar Ö., Gök Y., Akar M. A., Keskin A.
5th INTERNATIONAL PARIS CONGRESS ON APPLIED SCIENCES, Paris, Fransa, 4 - 08 Ağustos 2025, ss.21-37, (Tam Metin Bildiri) Creative Commons License Sürdürülebilir Kalkınma

4. Crashworthiness Analysis of Horizontal and Vertical Elliptical Cross-Sectİonal Beams in Vehicle Doors

Kumlu U., Hükümdar Ö., Kersin M., Akar M. A., Keskin A.
5th INTERNATIONAL PARIS CONGRESS ON APPLIED SCIENCES, Paris, Fransa, 4 - 08 Ağustos 2025, ss.38-49, (Tam Metin Bildiri) Creative Commons License Sürdürülebilir Kalkınma

5. Electrodeposited High Entropy Alloys: Effects on Surface Properties and Structural Integrity

Kumlu U., Akar M. A., Keskin A., Hükümdar Ö.
7th INTERNATIONAL CONGRESS on CONTEMPORARY SCIENTIFIC RESEARCH, Rome, İtalya, 30 Mart - 06 Nisan 2025, ss.36, (Özet Bildiri) Creative Commons License Sürdürülebilir Kalkınma

6. Synthesis and Mechanical Properties Investigation of Ni–P/Ni–B–Cr3C2 Duplex Composite Coatings

AŞGAN S. M., HÜKÜMDAR Ö., KUMLU U., KESKİN A., AKAR M. A.
11. INTERNATIONAL EUROPEAN CONGRESS ON ADVANCED STUDIES IN BASIC SCIENCES, ROMA, İtalya, 11 Kasım 2024, ss.128-141, (Tam Metin Bildiri)

7. Effect of TMAB and Cr3C2 concentration on surface hardness of Ni-B/Cr3C2 composite electrodeposition

AKAR M. A., KESKİN A., KUMLU U., HÜKÜMDAR Ö.
8th International Conference on Engineering Technology and Innovation (ICETI 2024), SARAYBOSNA, Bosna-Hersek, 2 - 06 Ekim 2024, (Özet Bildiri)

8. Investigation of The Effect of Bath Temperature on Ni-W/Al2O3 Nanocomposite Coatings Produced by Electrodeposition Method

AYBACI Y., YALYANÇ F., KOCABUĞA F. N., HÜKÜMDAR Ö., KUMLU U., KESKİN A., et al.
CUKUROVA 13th INTERNATIONAL SCIENTIFIC RESEARCHES CONFERENCE, Adana, Türkiye, 01 Eylül 2024, ss.272, (Özet Bildiri)

9. Effect of Pulse Frequency on Mechanical Properties of Electrodepositon Ni-W/Al2O3 Nanocomposites on Copper Substrate

AYBACI Y., YALYANÇ F., HÜKÜMDAR Ö., KUMLU U., KESKİN A., AKAR M. A.
CUKUROVA 13th INTERNATIONAL SCIENTIFIC RESEARCHES CONFERENCE, Adana, Türkiye, 01 Eylül 2024, ss.400-412, (Tam Metin Bildiri)

10. Examination of different material designs through finite element analysis on the military vehicle platform

Kumlu U., Karaçor B., Kılınç Ö., Aslan A.
IV. International Siirt Conference on Scientific Research, Siirt, Türkiye, 17 - 18 Kasım 2023, ss.268-286, (Tam Metin Bildiri)

11. Crashworthiness analysis of circular and elliptical cross-sectional beams in vehicle door

Kumlu U., Karaçor B., Özkeser B., Aslan A.
IV.International Siirt Conference on Scientific Research, Siirt, Türkiye, 17 - 18 Kasım 2023, ss.287-300, (Tam Metin Bildiri)

12. Ballistic evaluation of armor plates at different angles

Kumlu U., Akar M. A., Başer D., Hükümdar Ö., Karaçor B.
2nd International Congress on Multidisciplinary Natural Sciences, Ankara, Türkiye, 01 Aralık 2022, ss.230-240, (Tam Metin Bildiri) Sürdürülebilir Kalkınma

13. Effect of rotational thrust on different geometries in crashing boxes

Kumlu U., Erdal D., Karaçor B., Akar M. A.
7th International Mediterranean Science and Engineering Congress (IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, cilt.1, sa.212, ss.508-514, (Tam Metin Bildiri)

14. The effect of air gap of multi-layered armour configuration during ballistic impact

Kumlu U., Aldatmaz İ., Akar M. A., Karaçor B., Ercan E. S., Erdal D.
7th International Mediterranean Science and Engineering Congress (IMSEC 2022), Antalya, Türkiye, 24 - 26 Ekim 2022, cilt.1, sa.236, ss.565-570, (Tam Metin Bildiri)

15. EPS/RRG/KIRPILMIŞ FİBERLER/POLİMER REÇİNE KOMPOZİTLERİNİN DARBE DAYANIMININ İNCELENMESİ

Soyusinmez T., Güzelipek O., Serin H., Özcanlı M., Kumlu U., Yıldızhan Ş.
Mediterranean International Conference on Research in Applied Sciences, Antalya, Türkiye, 22 - 24 Nisan 2022, ss.147-153, (Tam Metin Bildiri)

16. Crashworthiness analysis of heavy truck chassis by using finite element analysis

Karaçor B., Kapulu İ., Kumlu U., Özcanlı M.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.635-642, (Tam Metin Bildiri)

17. Evaluation of Jute and Cotton Fabrics as Reinforcement Agent in Polymer Matrix Composites

Tosun A. T., Akar M. A., Kumlu U.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.311, (Özet Bildiri)

18. Crashworthiness Analysis of Vehicle Side Door Beam with Finite Element Analysis

Kumlu U., Akar M. A., Özcanlı M., Serin H., Çalık A.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.615, (Özet Bildiri)

19. Recycled Waste Tyre Granules as Filler Material in Polymer Matrix: Mechanical Characterization Assessment

Yel F., Akar M. A., Kumlu U.
6th International Mediterranean Science and Engineering Congress (IMSEC 2021), Antalya, Türkiye, 25 - 27 Ekim 2021, ss.310, (Özet Bildiri)
Metrikler

Yayın

39

Yayın (WoS)

11

Yayın (Scopus)

12

H-İndeks (WoS)

1

Atıf (Scopus)

31

H-İndeks (Scopus)

3

Proje

6

Açık Erişim

4
BM Sürdürülebilir Kalkınma Amaçları
SDG 9: AMAÇ 9: SANAYİ, YENİLİKÇİLİK VE ALTYAPI