Dr. &#214;ğr. &#220;yesi AYŞE NUR ACAR

MATERIALS TODAY COMMUNICATIONS , cilt.33, ss.104924-104935, 2022 (SCI-Expanded)

Green synthesis of Fe (II, III) oxides nanoparticles in the subcritical water medium and evaluation of their catalytic performance in the oxidation of metoprolol

Mutlu R. N., Yabalak E., Acar A. N., Gizir A. M.

JOURNAL OF NANOSTRUCTURE IN CHEMISTRY , cilt.12, sa.1, ss.79-92, 2022 (SCI-Expanded)

The effect of borax addition to aluminum alloy produced by powder metallurgy on mechanical and thermophysical properties

Mutlu R. N., Acar A. N., Gizir A. M.

Anti-Corrosion Methods And Materials , cilt.69, sa.1, ss.63-70, 2022 (SCI-Expanded)

Fe Addition Influence on the Mechanical and Thermophysical Behaviours of PM Alumix 431 Allo

Acar A. N., Mutlu R. N., Kaya D., Ekşi A. K., Ekicibil A.

JOURNAL OF MOLECULAR STRUCTURE , cilt.1, sa.1, ss.130031-130045, 2021 (SCI-Expanded)

Effect of pressure on the magnetic and structural properties of X2CrNiMo17-12-2 austenitic stainless steel prepared by powder metallurgy method

JOURNAL OF MOLECULAR STRUCTURE , cilt.1198, 2019 (SCI-Expanded)

Effect of temperature and pressure on mechanical, surface and electrochemical properties of Al-1.5Cu-5.5Zn-2.5Mg (Alumix-431)

ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., Yazici B.

ANTI-CORROSION METHODS AND MATERIALS , cilt.65, sa.6, ss.558-571, 2018 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

The impact of glass powder on surface and morphological properties of Alumix 431 alloy

The International Journal of Materials and Engineering Technology , cilt.7, sa.1, ss.32-37, 2024 (Hakemli Dergi) Sürdürülebilir Kalkınma

Structural and Surface Properties of Glass Powder Coated Cr Steels

The International Journal of Materials and Engineering Technology , cilt.4, sa.2, ss.109-116, 2021 (Hakemli Dergi) Sürdürülebilir Kalkınma

Pressure Influence on the Thermophysical Properties of 316L Austenitic Stainless Steels Manufactured By Powder Metallurgy Method

Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.35, sa.1, ss.241-249, 2020 (Hakemli Dergi)

Thermophysical Behaviours Of P/M Distaloy AE Alloys at Temperature Range of 0-600°C

The International Journal of Materials and Engineering Technology,(TIJMET) , cilt.002, ss.64-69, 2019 (Hakemli Dergi)

The Physical Properties Of Aluminium-7xxx Series Alloys Produced By Powder Metallurgy Method

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.21, ss.341-350, 2018 (ESCI)

Some Transport Properties of Alumix-431 Materials by Prepared P/M Method

Ekşi A. K., Acar A. N., Ekicibil A.

Manufacturing Science and Technology , cilt.3, sa.5, ss.253-258, 2015 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

The Impact of Glass Powder on Surface and Morphological Properties of Alumix 431 Alloy

The 5th International Conference of Materials and Engineering Technology (TICMET'23), Trabzon, Türkiye, 13 - 16 Kasım 2023, ss.345

Effect of 10% Portland limestone cement powder on the morphological properties of X12Cr13 martensitic stainless steels

4th International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2022), Ankara, Türkiye, 14 - 16 Aralık 2022, ss.570-574

Surface and Structural Properties of Martensitic Stainless Steel –Glass Powder Composite Materials Prepared by Powder Metallurgy Method

The 4th International Conference of Materials and Engineering Technology (TICMET'22), İstanbul, Türkiye, 8 - 10 Eylül 2022, ss.99-103

Structural And Surface Propertıes Of Glass Powder Coated Cr Steels

The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.252

A Revıew on Alumınıum Matrıx Composıtes Manufactured by Powder Metallurgy,

Pesen E., Ekşi A. K., Acar A. N., Ekicibil A.

The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.54-62

Effect of Glass Powder on the Surface and Microstructural Properties of Dual Phase Steels

’8th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2021), Elazığ, Türkiye, 14 - 16 Temmuz 2021, ss.13-19

Thermophysical Behaviors of Alumix (431)–Fe Alloy Mixtures Prepared by Powder Metallurgy Method

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.

6th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2019), Niğde, Türkiye, 16 - 18 Ekim 2019, ss.70-74

Specific Heat Capacity Behaviours of P/M Distaloy AE Alloy Compacts

International Conference on Condensed Matter and Materials Science-2019 (ICCMMS-19), Adana, Türkiye, 14 - 19 Ekim 2019, ss.7-13

Corrosion Properties Of Distaloy AE Alloys Prepared By P M Method In 1M KOH Solutıon

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.

The International Conference of Materials and Engineering Technologies (TICMET’19), Gaziantep, Türkiye, 10 - 12 Ekim 2019, ss.743-751

Structural and Physical Properties of Sintered Distaloy AE Alloy Compacts

Fourth International Iron and Steel Symposium (UDCS'19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019, ss.231-233

Hardness, Density and Surface Properties of P/M Alumix-(431)–Fe Alloy Mixtures

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.288-290

’Magnetization and Electrical Resistivity of Al-7xxx Alloys Manufacturing by Powder Metallurgy Method

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.291-293

Corrosion Properties of Austenitic and Martensitic Stainless Steels Produced by Powder Metallurgy Method”

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A., Yazıcı B.

XVth International Corrosion Symposium (KORSEM’18), Hatay, Türkiye, 26 - 28 Eylül 2018, ss.369-381

Pressure Influence on the Thermophysical Properties of the P/M- Fe-Cr Martensitic Stainless Steels

1st International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018), Ankara, Türkiye, 22 - 23 Kasım 2018, ss.2020-2024

Evaluation of the Impact Toughnesses of the P/M-X12Cr13 Martensitic Stainless Steels

3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Türkiye, 24 - 26 Ekim 2018, ss.306-309

Investigation of Magnetic Properties of Zamak-2 Alloy Prepared by Powder Metallurgy

KOCA B., MUTLU R. N., ACAR A. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.

5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.334-337

On the View of the Impact Toughness of P/M- X2CrNiMo17-12-2 Austenitic Stainless Steels?

5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.1-4

On the View of the Thermo-Physical Properties of X2CrNiMo17-12-2 Austenitic Stainless Steels Prepared by P/M Method

International Conference on Physical Chemistry and Functional Materials (PCFM 2018), Elazığ, Türkiye, 19 - 21 Haziran 2018, ss.120

On the Study of the Structural Properties of Fe-Cr Martensitic Stainless Steels Prepared by Powder Metallurgy Method

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, ss.1

The Effect of Pressure on the Magnetic Properties of X12Cr13 Martensitic Stainless Steels Prepared by Powder Metallurgy Method