Prof. Dr. ABDUL KADİR EKŞİ

MATERIALS TODAY COMMUNICATIONS , cilt.33, ss.104924-104935, 2022 (SCI-Expanded)

Real 3D turning simulation of materials with cylindrical shapes using ABAQUS/Explicit

İYNEN O., EKŞİ A. K., AKYILDIZ H. K., ÖZDEMİR M.

JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.43, sa.8, 2021 (SCI-Expanded)

Fe Addition Influence on the Mechanical and Thermophysical Behaviours of PM Alumix 431 Allo

Acar A. N., Mutlu R. N., Kaya D., Ekşi A. K., Ekicibil A.

JOURNAL OF MOLECULAR STRUCTURE , cilt.1, sa.1, ss.130031-130045, 2021 (SCI-Expanded)

Experimental and numerical investigation of cutting forces during turning of cylindrical AISI 4340 steel specimens

İYNEN O., EKŞİ A. K., ÖZDEMİR M., AKYILDIZ H. K.

MATERIALS TESTING , cilt.63, sa.5, ss.402-410, 2021 (SCI-Expanded)

Effect of pressure on the magnetic and structural properties of X2CrNiMo17-12-2 austenitic stainless steel prepared by powder metallurgy method

Iynen O., EKŞİ A. K., BİRCAN D. A.

JOURNAL OF MOLECULAR STRUCTURE , cilt.1198, 2019 (SCI-Expanded)

Effect of temperature and pressure on mechanical, surface and electrochemical properties of Al-1.5Cu-5.5Zn-2.5Mg (Alumix-431)

ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., Yazici B.

ANTI-CORROSION METHODS AND MATERIALS , cilt.65, sa.6, ss.558-571, 2018 (SCI-Expanded)

Experimental and numerical studies of metallic powders subjected to cold isostatic pressing

EKŞİ A. K., Laman M., BİRCAN D. A., Demir A.

INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.102, sa.5, ss.572-578, 2011 (SCI-Expanded)

The effects of sintering and shot peening processes on the fatigue strength

IYNEN O., EKŞİ A. K., BİRCAN D. A., DİLEK M.

MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.41, sa.4, ss.202-212, 2010 (SCI-Expanded)

Effect Of Shot Peening Process On Alumix 431 Powder Materials

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.25, sa.1, ss.83-93, 2010 (SCI-Expanded)

Alumix 431 Tozunun (Al7xxx) Soğuk ve Sıcak Preslenmesi Üzerine Bir Çalışma

EKŞİ A. K., BİRCAN D. A., Sonsino C.

JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.22, ss.337-345, 2007 (SCI-Expanded)

Investigation of mechanical properties before and after sintering of cold isostatically pressed metallic powders

Eksi A. K.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.44, sa.4, ss.191-198, 2006 (SCI-Expanded)

Tensile and fatigue properties of cold and warm compacted Alumix 431 alloy

Eksi A. K., VELTL G., PETZOLDT F., LIPP K., SONSINO C.

POWDER METALLURGY , cilt.47, sa.1, ss.60-64, 2004 (SCI-Expanded)

Experimental and numerical studies of metal powders pressed by uniaxial floating die: Case copper and bronze

Eksi A. K., Laman M., ATİŞ C. D., Yildiz A., KURT A. O.

KOVOVE MATERIALY-METALLIC MATERIALS , cilt.42, sa.5, ss.339-352, 2004 (SCI-Expanded)

Diğer Dergilerde Yayınlanan Makaleler

ALAŞIMLI ALÜMİNYUM BORU MALZEMELERDE BÜZME/ÇAP AZALTMA UYGULAMALARI

TAŞ M., EKŞİ A. K.

KSÜ Mühendislik Bilimleri Dergisi , cilt.27, sa.3, ss.929-937, 2024 (Hakemli Dergi)

Structural and Surface Properties of Glass Powder Coated Cr Steels

The International Journal of Materials and Engineering Technology , cilt.4, sa.2, ss.109-116, 2021 (Hakemli Dergi) Sürdürülebilir Kalkınma

Pressure Influence on the Thermophysical Properties of 316L Austenitic Stainless Steels Manufactured By Powder Metallurgy Method

Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.35, sa.1, ss.241-249, 2020 (Hakemli Dergi)

THERMOPHYSICAL BEHAVIOURS OF P/M DISTALOY AE ALLOYS AT TEMPERATURE RANGE OF 0-600 0C

The International journal of Materials and Engineerin Technology , cilt.2, sa.2, ss.64-69, 2019 (Hakemli Dergi)

The Physical Properties Of Aluminium-7xxx Series Alloys Produced By Powder Metallurgy Method

EKŞİ A. K., ACAR A. N., EKİCİBİL A.

JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.21, ss.341-350, 2018 (ESCI)

Alüminyum Alaşımının Frezelenmesi İşleminde Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin İncelenmesi

KÜLEKCİ M. K., EŞME U., EKŞİ A. K., KOÇOĞLU Z., YILMAZ N. F.

Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.32, sa.2, ss.153-160, 2017 (Hakemli Dergi)

En Aw 5754 (Almg3) Alüminyum Alaşımının Frezelenmesi İşleminde Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin İncelenmesi

KÜLEKCİ M. K., EŞME U., EKŞİ A. K., ZÜLFÜ K., YILMAZ N. F.

Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.32, sa.2, ss.153-160, 2017 (Hakemli Dergi)

Investigation of CuNO3 as Diesel Fuel Additives

KESKİN A., YAŞAR A., EKŞİ A. K.

International Journal of Natural and Engineering Sciences , cilt.11, sa.1, ss.34-39, 2017 (Hakemli Dergi)

Development of the Customized Implant System Using CAD/CAM/CAE Tools

BİRCAN D. A., Dede D., EKŞİ A. K.

Advances in Materials and Processing Technologies , sa.2, ss.57-65, 2016 (Scopus)

Some Transport Properties of Alumix-431 Materials by Prepared P/M Method

Manufacturing Science and Technology , cilt.3, sa.5, ss.253-258, 2015 (Hakemli Dergi)

Tomografi Verisinden Elde Edilen Alt Çeneye Uygun İmplant-Abutment Tasarımı ve Analizi

BİRCAN D. A., Dede D., EKŞİ A. K.

CAD/CAM/CAE Dünyası , cilt.33, ss.42-47, 2013 (Hakemli Dergi)

IGES Based Direct and Adaptive Slicing of CAD Models For RP Applications

BİRCAN D. A., EKŞİ A. K.

Ç.Ü Fen ve Mühendislik Bilimleri Dergisi , cilt.3, ss.10-19, 2008 (Hakemli Dergi)

The investigation in properties of welded 5xxx series Al Alloys by friction stir welding

DİLEK M., EKŞİ A. K.

Journal of Science and Engineering , ss.123-132, 2007 (Hakemsiz Dergi)

Data Transfer in Layered Manufacturing

BİRCAN D. A., EKŞİ A. K.

Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.22, ss.12-24, 2007 (Hakemli Dergi)

5083-O,5186-H111 ve 5083-H111 Alüminyum Alaşımlarının Sürtünme Karıştırma Kaynak Yöntemiyle Birleştirilmesi

DİLEK M., BİRCAN D. A., EKŞİ A. K.

Ç.Ü. Mühendislik-Mimarlık Fakültesi Dergisi , ss.255-268, 2007 (Hakemsiz Dergi)

Dizel Motorlarda Mısır Yağı Biyodizelinin Yakıt Olarak Kullanımının Motor Performans ve Emisyonuna Etkisi

KESKİN A., EKŞİ A. K.

C.B.Ü. Fen Bilimleri Dergisi , cilt.2, sa.1, ss.49-55, 2006 (Hakemli Dergi)

Effects of Powder Hardness and Particle Size on the Densificationof Cold Isostatically Pressed Powders

EKŞİ A. K., Süleyman S.

Turkish J. Eng. Env. Sci. , sa.26, ss.377-384, 2002 (Hakemli Dergi)

Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler

Surface and Structural Properties of Martensitic Stainless Steel –Glass Powder Composite Materials Prepared by Powder Metallurgy Method

The 4th International Conference of Materials and Engineering Technology (TICMET'22), İstanbul, Türkiye, 8 - 10 Eylül 2022, ss.99-103, (Tam Metin Bildiri)

A Revıew on Alumınıum Matrıx Composıtes Manufactured by Powder Metallurgy,

Pesen E., Ekşi A. K., Acar A. N., Ekicibil A.

The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.54-62, (Tam Metin Bildiri)

Structural And Surface Propertıes Of Glass Powder Coated Cr Steels

The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.252, (Özet Bildiri)

Effect of Glass Powder on the Surface and Microstructural Properties of Dual Phase Steels

’8th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2021), Elazığ, Türkiye, 14 - 16 Temmuz 2021, ss.13-19, (Tam Metin Bildiri)

Thermophysical Behaviors of Alumix (431)–Fe Alloy Mixtures Prepared by Powder Metallurgy Method

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.

6th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2019), Niğde, Türkiye, 16 - 18 Ekim 2019, ss.70-74, (Tam Metin Bildiri)

Specific Heat Capacity Behaviours of P/M Distaloy AE Alloy Compacts

International Conference on Condensed Matter and Materials Science-2019 (ICCMMS-19), Adana, Türkiye, 14 - 19 Ekim 2019, ss.7-13, (Tam Metin Bildiri)

Corrosion Properties Of Distaloy AE Alloys Prepared By P M Method In 1M KOH Solutıon

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.

The International Conference of Materials and Engineering Technologies (TICMET’19), Gaziantep, Türkiye, 10 - 12 Ekim 2019, ss.743-751, (Tam Metin Bildiri)

Structural and Physical Properties of Sintered Distaloy AE Alloy Compacts

Fourth International Iron and Steel Symposium (UDCS'19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019, ss.231-233, (Tam Metin Bildiri)

’Magnetization and Electrical Resistivity of Al-7xxx Alloys Manufacturing by Powder Metallurgy Method

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.291-293, (Tam Metin Bildiri)

Hardness, Density and Surface Properties of P/M Alumix-(431)–Fe Alloy Mixtures

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.

4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.288-290, (Tam Metin Bildiri)

Corrosion Properties of Austenitic and Martensitic Stainless Steels Produced by Powder Metallurgy Method”

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A., Yazıcı B.

XVth International Corrosion Symposium (KORSEM’18), Hatay, Türkiye, 26 - 28 Eylül 2018, ss.369-381, (Tam Metin Bildiri)

Pressure Influence on the Thermophysical Properties of the P/M- Fe-Cr Martensitic Stainless Steels

1st International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018), Ankara, Türkiye, 22 - 23 Kasım 2018, ss.2020-2024, (Tam Metin Bildiri)

Evaluation of the Impact Toughnesses of the P/M-X12Cr13 Martensitic Stainless Steels

3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Türkiye, 24 - 26 Ekim 2018, ss.306-309, (Tam Metin Bildiri)

On the View of the Impact Toughness of P/M- X2CrNiMo17-12-2 Austenitic Stainless Steels?

5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.1-4, (Tam Metin Bildiri)

Investigation of Magnetic Properties of Zamak-2 Alloy Prepared by Powder Metallurgy

KOCA B., MUTLU R. N., ACAR A. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.

5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.334-337, (Tam Metin Bildiri)

On the View of the Thermo-Physical Properties of X2CrNiMo17-12-2 Austenitic Stainless Steels Prepared by P/M Method

International Conference on Physical Chemistry and Functional Materials (PCFM 2018), Elazığ, Türkiye, 19 - 21 Haziran 2018, ss.120, (Tam Metin Bildiri)

Investigation of CuNO3 as Diesel Fuel Additives

KESKİN A., YAŞAR A., EKŞİ A. K.

3rd International Congress on Natural and Engineering Sciences, 21 - 25 Temmuz 2017, (Özet Bildiri)

On the Study of the Structural Properties of Fe-Cr Martensitic Stainless Steels Prepared by Powder Metallurgy Method

2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, ss.1, (Özet Bildiri)

The Effect of Pressure on the Magnetic Properties of X12Cr13 Martensitic Stainless Steels Prepared by Powder Metallurgy Method

International Conference on Condensed Matter and Material Sciences(ICCMMS2017), Adana, Türkiye, 11 - 15 Ekim 2017, ss.85, (Tam Metin Bildiri)

On the Structural Properties of Martensitic and Austenitic Stainless STeels Prepared by Powder Metallurgy

2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC'17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.750, (Tam Metin Bildiri)

The Magnetic Properties of X2CrNiMo17-12-2 Austenitic Stainless Steels Produced by P/M Method

4th International Conference on Materials Science and Nanotechnology for Next Generation (MSNG-2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.268, (Tam Metin Bildiri)

Investigating of Structural Properties of 316L Austenitic Stainless Steels Manufactured by P/M Method

4th International Conference on Materials Science and Nanotechnology for Next Generation (MSNG-2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.276, (Tam Metin Bildiri)

Investigation of the Mechanical and Surface Properties of Alumix 431 Alloys Prepared by Powder Metallurgy

ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.

1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, ss.1, (Özet Bildiri)

Askeri Kara Araçlarında Mayın Koruma Tedbirleri

EKŞİ A. K., Erbil Y., BİRCAN D. A., Güzel S.

1st International Mediterranean Science And Engineering Congress (IMSEC2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.318-330, (Tam Metin Bildiri)

Mayınlı Alan Temizleme Ve Geçit Açma Sistemleri

Erbil Y., EKŞİ A. K., BİRCAN D. A., Güzel S.

1st International Mediterranean Science And Engineering Congress (IMSEC2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.10-20, (Tam Metin Bildiri)

The DSC Studies and Thermoelectric Properties of Alumix (431) Alloy prepared by P/M Method

EKŞİ A. K., ACAR A. N., EKİCİBİL A.

2nd International of Advanced and Functional Material Technologies (AFMAT), Antalya, Türkiye, 20 - 22 Ekim 2016, ss.11, (Özet Bildiri)

Investigation of Alumix (431) Anode for Al-Air Battery Performance

Mutlu R. N., Acar A. N., Ekşi A. K., Ekicibil A., Yazıcı B.

2nd International of Advanced and Functional Material Technologies (AFMAT), Antalya, Türkiye, 20 - 22 Ekim 2016, ss.25, (Özet Bildiri)

Corrosion Properties of Cold and Warm Compacted Alumix (431) Alloys

ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.

Uluslararası Enerji Ve Mühendislik Kongresi (UEMK), Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.820, (Tam Metin Bildiri)

Evaluation of Ni and Mo based additives as a Combustion Catalyst for Diesel Fuel

EKŞİ A. K., KESKİN A., YAŞAR A.

2nd International Congress on Natural Engineering and Sciences, 1 - 05 Eylül 2016, (Tam Metin Bildiri)

Evaluation of Ni and Mo Based Additives as a Combustion Catalyst for Diesel Fuels

EKŞİ A. K., KESKİN A., YAŞAR A.

2nd International Journal of Natural and Engineering Sciences, Üsküp, Makedonya, 1 - 05 Eylül 2016, ss.27-31, (Tam Metin Bildiri)

Sürtünme Karıştırma Esaslı İşleme Yöntemleri

ÖCALIR Ş., Külekçi M. K., EŞME U., EKŞİ A. K.

4 th INTERNATIONAL CONFERENCE ON WELDING TECHNOLOGIES and EXHIBITION, 11 - 13 Mayıs 2016, (Tam Metin Bildiri)

Some Transport Properties of Alumix 431 Materials by Prepared P M Method

AMPT Conferences-Manufacturing, Machining, Repairing& Advanced Material for Oil & Gas Industry, Dubai, Birleşik Arap Emirlikleri, 17 - 20 Aralık 2014, cilt.3, ss.253-258, (Tam Metin Bildiri)

A study of Physical and Thermoelectric Properties of Alumix Materials Produced PM Method

EUROMAT2015, 24 - 28 Eylül 2015, (Özet Bildiri)

A Study of Physical and Thermoelectric Properties of Alumix(431) Materials Produced P/M Method