Yayınlar & Eserler

Yayın Ağı

SCI, SSCI ve AHCI İndekslerine Giren Dergilerde Yayınlanan Makaleler

Pressure effect on the structural, magnetic and thermophysical properties of X12Cr13 martensitic stainless steel prepared by powder metallurgy method

Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
MATERIALS TODAY COMMUNICATIONS , cilt.33, ss.104924-104935, 2022 (SCI-Expanded)

Real 3D turning simulation of materials with cylindrical shapes using ABAQUS/Explicit

İYNEN O., EKŞİ A. K., AKYILDIZ H. K., ÖZDEMİR M.
JOURNAL OF THE BRAZILIAN SOCIETY OF MECHANICAL SCIENCES AND ENGINEERING , cilt.43, sa.8, 2021 (SCI-Expanded) identifier identifier

Fe Addition Influence on the Mechanical and Thermophysical Behaviours of PM Alumix 431 Allo

Acar A. N., Mutlu R. N., Kaya D., Ekşi A. K., Ekicibil A.
JOURNAL OF MOLECULAR STRUCTURE , cilt.1, sa.1, ss.130031-130045, 2021 (SCI-Expanded)

Experimental and numerical investigation of cutting forces during turning of cylindrical AISI 4340 steel specimens

İYNEN O., EKŞİ A. K., ÖZDEMİR M., AKYILDIZ H. K.
MATERIALS TESTING , cilt.63, sa.5, ss.402-410, 2021 (SCI-Expanded) identifier identifier

Effect of pressure on the magnetic and structural properties of X2CrNiMo17-12-2 austenitic stainless steel prepared by powder metallurgy method

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
JOURNAL OF MOLECULAR STRUCTURE , cilt.1198, 2019 (SCI-Expanded) identifier identifier

Effect of temperature and pressure on mechanical, surface and electrochemical properties of Al-1.5Cu-5.5Zn-2.5Mg (Alumix-431)

ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., Yazici B.
ANTI-CORROSION METHODS AND MATERIALS , cilt.65, sa.6, ss.558-571, 2018 (SCI-Expanded) identifier identifier

Experimental and numerical studies of metallic powders subjected to cold isostatic pressing

EKŞİ A. K., Laman M., BİRCAN D. A., Demir A.
INTERNATIONAL JOURNAL OF MATERIALS RESEARCH , cilt.102, sa.5, ss.572-578, 2011 (SCI-Expanded) identifier identifier

The effects of sintering and shot peening processes on the fatigue strength

IYNEN O., EKŞİ A. K., BİRCAN D. A., DİLEK M.
MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK , cilt.41, sa.4, ss.202-212, 2010 (SCI-Expanded) identifier identifier

Effect Of Shot Peening Process On Alumix 431 Powder Materials

Iynen O., EKŞİ A. K., BİRCAN D. A.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.25, sa.1, ss.83-93, 2010 (SCI-Expanded)

Alumix 431 Tozunun (Al7xxx) Soğuk ve Sıcak Preslenmesi Üzerine Bir Çalışma

EKŞİ A. K., BİRCAN D. A., Sonsino C.
JOURNAL OF THE FACULTY OF ENGINEERING AND ARCHITECTURE OF GAZI UNIVERSITY , cilt.22, ss.337-345, 2007 (SCI-Expanded)

Investigation of mechanical properties before and after sintering of cold isostatically pressed metallic powders

Eksi A. K.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.44, sa.4, ss.191-198, 2006 (SCI-Expanded) identifier identifier

Tensile and fatigue properties of cold and warm compacted Alumix 431 alloy

Eksi A. K., VELTL G., PETZOLDT F., LIPP K., SONSINO C.
POWDER METALLURGY , cilt.47, sa.1, ss.60-64, 2004 (SCI-Expanded) identifier identifier

Experimental and numerical studies of metal powders pressed by uniaxial floating die: Case copper and bronze

Eksi A. K., Laman M., ATİŞ C. D., Yildiz A., KURT A. O.
KOVOVE MATERIALY-METALLIC MATERIALS , cilt.42, sa.5, ss.339-352, 2004 (SCI-Expanded) identifier identifier

Diğer Dergilerde Yayınlanan Makaleler

Structural and Surface Properties of Glass Powder Coated Cr Steels

Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The International Journal of Materials and Engineering Technology , cilt.4, sa.2, ss.109-116, 2021 (Hakemli Dergi)

Pressure Influence on the Thermophysical Properties of 316L Austenitic Stainless Steels Manufactured By Powder Metallurgy Method

Acar A. N., Ekşi A. K., Ekicibil A.
Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.35, sa.1, ss.241-249, 2020 (Hakemli Dergi)

THERMOPHYSICAL BEHAVIOURS OF P/M DISTALOY AE ALLOYS AT TEMPERATURE RANGE OF 0-600 0C

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
The International journal of Materials and Engineerin Technology , cilt.2, sa.2, ss.64-69, 2019 (Hakemli Dergi)

The Physical Properties Of Aluminium-7xxx Series Alloys Produced By Powder Metallurgy Method

Acar A. N., Ekşi A. K., Ekicibil A.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI , cilt.21, ss.341-350, 2018 (ESCI) identifier

Alüminyum Alaşımının Frezelenmesi İşleminde Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin İncelenmesi

KÜLEKCİ M. K., EŞME U., EKŞİ A. K., KOÇOĞLU Z., YILMAZ N. F.
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.32, sa.2, ss.153-160, 2017 (Hakemli Dergi)

Investigation of CuNO3 as Diesel Fuel Additives

KESKİN A., YAŞAR A., EKŞİ A. K.
International Journal of Natural and Engineering Sciences , cilt.11, sa.1, ss.34-39, 2017 (Hakemli Dergi)

En Aw 5754 (Almg3) Alüminyum Alaşımının Frezelenmesi İşleminde Kesme Parametrelerinin Yüzey Pürüzlülüğüne Etkisinin İncelenmesi

KÜLEKCİ M. K., EŞME U., EKŞİ A. K., ZÜLFÜ K., YILMAZ N. F.
Çukurova Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi , cilt.32, sa.2, ss.153-160, 2017 (Hakemli Dergi)

Development of the Customized Implant System Using CAD/CAM/CAE Tools

BİRCAN D. A., Dede D., EKŞİ A. K.
Advances in Materials and Processing Technologies , sa.2, ss.57-65, 2016 (Scopus)

Some Transport Properties of Alumix-431 Materials by Prepared P/M Method

EKŞİ A. K., ACAR A. N., EKİCİBİL A.
Manufacturing Science and Technology , cilt.3, sa.5, ss.253-258, 2015 (Hakemli Dergi)

Tomografi Verisinden Elde Edilen Alt Çeneye Uygun İmplant-Abutment Tasarımı ve Analizi

BİRCAN D. A., Dede D., EKŞİ A. K.
CAD/CAM/CAE Dünyası , cilt.33, ss.42-47, 2013 (Hakemli Dergi)

IGES Based Direct and Adaptive Slicing of CAD Models For RP Applications

BİRCAN D. A., EKŞİ A. K.
Ç.Ü Fen ve Mühendislik Bilimleri Dergisi , cilt.3, ss.10-19, 2008 (Hakemli Dergi)

The investigation in properties of welded 5xxx series Al Alloys by friction stir welding

DİLEK M., EKŞİ A. K.
Journal of Science and Engineering , ss.123-132, 2007 (Hakemsiz Dergi)

Data Transfer in Layered Manufacturing

BİRCAN D. A., EKŞİ A. K.
Çukurova Üniversitesi Mühendislik-Mimarlik Fakültesi Dergisi , cilt.22, ss.12-24, 2007 (Hakemli Dergi)

5083-O,5186-H111 ve 5083-H111 Alüminyum Alaşımlarının Sürtünme Karıştırma Kaynak Yöntemiyle Birleştirilmesi

DİLEK M., BİRCAN D. A., EKŞİ A. K.
Ç.Ü. Mühendislik-Mimarlık Fakültesi Dergisi , ss.255-268, 2007 (Hakemsiz Dergi)

Dizel Motorlarda Mısır Yağı Biyodizelinin Yakıt Olarak Kullanımının Motor Performans ve Emisyonuna Etkisi

KESKİN A., EKŞİ A. K.
C.B.Ü. Fen Bilimleri Dergisi , cilt.2, sa.1, ss.49-55, 2006 (Hakemli Dergi)

Effects of Powder Hardness and Particle Size on the Densificationof Cold Isostatically Pressed Powders

EKŞİ A. K., Süleyman S.
Turkish J. Eng. Env. Sci. , sa.26, ss.377-384, 2002 (Hakemli Dergi)

Hakemli Kongre / Sempozyum Bildiri Kitaplarında Yer Alan Yayınlar

Surface and Structural Properties of Martensitic Stainless Steel –Glass Powder Composite Materials Prepared by Powder Metallurgy Method

Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The 4th International Conference of Materials and Engineering Technology (TICMET'22), İstanbul, Türkiye, 8 - 10 Eylül 2022, ss.99-103

A Revıew on Alumınıum Matrıx Composıtes Manufactured by Powder Metallurgy,

Pesen E., Ekşi A. K., Acar A. N., Ekicibil A.
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.54-62

Structural And Surface Propertıes Of Glass Powder Coated Cr Steels

Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.252

Effect of Glass Powder on the Surface and Microstructural Properties of Dual Phase Steels

Acar A. N., Ekşi A. K., Ekicibil A.
’8th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2021), Elazığ, Türkiye, 14 - 16 Temmuz 2021, ss.13-19

Thermophysical Behaviors of Alumix (431)–Fe Alloy Mixtures Prepared by Powder Metallurgy Method

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.
6th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2019), Niğde, Türkiye, 16 - 18 Ekim 2019, ss.70-74

Specific Heat Capacity Behaviours of P/M Distaloy AE Alloy Compacts

Acar A. N., Ekşi A. K., Ekicibil A.
International Conference on Condensed Matter and Materials Science-2019 (ICCMMS-19), Adana, Türkiye, 14 - 19 Ekim 2019, ss.7-13

Corrosion Properties Of Distaloy AE Alloys Prepared By P M Method In 1M KOH Solutıon

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.
The International Conference of Materials and Engineering Technologies (TICMET’19), Gaziantep, Türkiye, 10 - 12 Ekim 2019, ss.743-751

Structural and Physical Properties of Sintered Distaloy AE Alloy Compacts

Acar A. N., Ekşi A. K., Ekicibil A.
Fourth International Iron and Steel Symposium (UDCS'19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019, ss.231-233

’Magnetization and Electrical Resistivity of Al-7xxx Alloys Manufacturing by Powder Metallurgy Method

Acar A. N., Ekşi A. K., Ekicibil A.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.291-293

Hardness, Density and Surface Properties of P/M Alumix-(431)–Fe Alloy Mixtures

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.288-290

Corrosion Properties of Austenitic and Martensitic Stainless Steels Produced by Powder Metallurgy Method”

Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A., Yazıcı B.
XVth International Corrosion Symposium (KORSEM’18), Hatay, Türkiye, 26 - 28 Eylül 2018, ss.369-381

Pressure Influence on the Thermophysical Properties of the P/M- Fe-Cr Martensitic Stainless Steels

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
1st International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018), Ankara, Türkiye, 22 - 23 Kasım 2018, ss.2020-2024

Evaluation of the Impact Toughnesses of the P/M-X12Cr13 Martensitic Stainless Steels

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Türkiye, 24 - 26 Ekim 2018, ss.306-309

On the View of the Impact Toughness of P/M- X2CrNiMo17-12-2 Austenitic Stainless Steels?

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.1-4

Investigation of Magnetic Properties of Zamak-2 Alloy Prepared by Powder Metallurgy

KOCA B., MUTLU R. N., ACAR A. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.
5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.334-337

On the View of the Thermo-Physical Properties of X2CrNiMo17-12-2 Austenitic Stainless Steels Prepared by P/M Method

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
International Conference on Physical Chemistry and Functional Materials (PCFM 2018), Elazığ, Türkiye, 19 - 21 Haziran 2018, ss.120

Investigation of CuNO3 as Diesel Fuel Additives

KESKİN A., YAŞAR A., EKŞİ A. K.
3rd International Congress on Natural and Engineering Sciences, 21 - 25 Temmuz 2017

On the Study of the Structural Properties of Fe-Cr Martensitic Stainless Steels Prepared by Powder Metallurgy Method

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, ss.1

The Effect of Pressure on the Magnetic Properties of X12Cr13 Martensitic Stainless Steels Prepared by Powder Metallurgy Method

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
International Conference on Condensed Matter and Material Sciences(ICCMMS2017), Adana, Türkiye, 11 - 15 Ekim 2017, ss.85

On the Structural Properties of Martensitic and Austenitic Stainless STeels Prepared by Powder Metallurgy

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC'17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.750

The Magnetic Properties of X2CrNiMo17-12-2 Austenitic Stainless Steels Produced by P/M Method

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
4th International Conference on Materials Science and Nanotechnology for Next Generation (MSNG-2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.268

Investigating of Structural Properties of 316L Austenitic Stainless Steels Manufactured by P/M Method

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
4th International Conference on Materials Science and Nanotechnology for Next Generation (MSNG-2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.276

Investigation of the Mechanical and Surface Properties of Alumix 431 Alloys Prepared by Powder Metallurgy

ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.
1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, ss.1

Askeri Kara Araçlarında Mayın Koruma Tedbirleri

EKŞİ A. K., Erbil Y., BİRCAN D. A., Güzel S.
1st International Mediterranean Science And Engineering Congress (IMSEC2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.318-330

Mayınlı Alan Temizleme Ve Geçit Açma Sistemleri

Erbil Y., EKŞİ A. K., BİRCAN D. A., Güzel S.
1st International Mediterranean Science And Engineering Congress (IMSEC2016), Adana, Türkiye, 26 - 28 Ekim 2016, ss.10-20

The DSC Studies and Thermoelectric Properties of Alumix (431) Alloy prepared by P/M Method

Acar A. N., Ekşi A. K., Ekicibil A.
2nd International of Advanced and Functional Material Technologies (AFMAT), Antalya, Türkiye, 20 - 22 Ekim 2016, ss.11

Investigation of Alumix (431) Anode for Al-Air Battery Performance

Mutlu R. N., Acar A. N., Ekşi A. K., Ekicibil A., Yazıcı B.
2nd International of Advanced and Functional Material Technologies (AFMAT), Antalya, Türkiye, 20 - 22 Ekim 2016, ss.25

Corrosion Properties of Cold and Warm Compacted Alumix (431) Alloys

ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.
Uluslararası Enerji Ve Mühendislik Kongresi (UEMK), Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.820 Creative Commons License

Evaluation of Ni and Mo based additives as a Combustion Catalyst for Diesel Fuel

EKŞİ A. K., KESKİN A., YAŞAR A.
2nd International Congress on Natural Engineering and Sciences, 1 - 05 Eylül 2016

Evaluation of Ni and Mo Based Additives as a Combustion Catalyst for Diesel Fuels

EKŞİ A. K., KESKİN A., YAŞAR A.
2nd International Journal of Natural and Engineering Sciences, Üsküp, Makedonya, 1 - 05 Eylül 2016, ss.27-31

Sürtünme Karıştırma Esaslı İşleme Yöntemleri

ÖCALIR Ş., Külekçi M. K., EŞME U., EKŞİ A. K.
4 th INTERNATIONAL CONFERENCE ON WELDING TECHNOLOGIES and EXHIBITION, 11 - 13 Mayıs 2016

Some Transport Properties of Alumix 431 Materials by Prepared P M Method

EKŞİ A. K., ACAR A. N., EKİCİBİL A.
AMPT Conferences-Manufacturing, Machining, Repairing& Advanced Material for Oil & Gas Industry, Dubai, Birleşik Arap Emirlikleri, 17 - 20 Aralık 2014, cilt.3, ss.253-258

A study of Physical and Thermoelectric Properties of Alumix Materials Produced PM Method

ACAR A. N., EKŞİ A. K., EKİCİBİL A.
EUROMAT2015, 24 - 28 Eylül 2015

A Study of Physical and Thermoelectric Properties of Alumix(431) Materials Produced P/M Method

Acar A. N., Ekşi A. K., Ekicibil A.
European Congress and Exhibition on Advanced Materials and Process (Euromat, 2015), Warszawa, Polonya, 20 - 25 Eylül 2015, ss.1

Review: Searching of Thermoelectric Properties of of Al and Al Derivated Alloys Produced P/M Methods

ACAR A. N., EKŞİ A. K.
7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2015, ss.40-41

Design and Analysis of the Customized Implant System Using CAD/CAM/CAE Tools

BİRCAN D. A., Dede D., EKŞİ A. K.
3rd International Symposium on Innovative Technologies in Engineering and Science, ISITES2015, Valencia, İspanya, 3 - 05 Haziran 2015, ss.34-42

The Fatigue Properties of the Machine Elements Produced By Powder Metallurgy

Ünal S., Ekşi A. K., Acar A. N., Dede D.
7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.50-51

Manufacturing of Dental Implants Using Powder Metallurgy (P/M) Process

BİRCAN D. A., EKŞİ A. K., Dede D.
7th International Powder Metallurgy Conference, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.125-132

Construction of 3d Finite Element Model of Human Mandible for Biomechanical Analysis

DİLEK M., BİRCAN D. A., EKŞİ A. K.
2nd International Scientific Conference on Engineering, Antalya, Türkiye, 22 - 24 Kasım 2012, ss.409-413

The Effect of sintering and Nitriding Processes on Distaloy AE Powder Materials

AKBULUT İ., EKŞİ A. K., BİRCAN D. A., DİLEK M.
6th International Powder Metallurgy Conference & Exhibition, Ankara, Türkiye, 1 - 03 Haziran 2011, ss.100

Spall Liner: From Fiber to Protection

Erbil Y., EKŞİ A. K., BİRCAN D. A.
6th International Advanced Technologies Symposium (IATS?11, Elazığ, Türkiye, 16 - 18 Mayıs 2011, ss.146-156

Materials Used in Ballistic Protection

Erbil Y., EKŞİ A. K., BİRCAN D. A.
13th International Materials Symposium (IMSP?2010), Denizli, Türkiye, 13 - 15 Ekim 2010, ss.137-145

Sürtünme Karıştırma Kaynak Yöntemi ile Birleştirilen 5083-0 ve 5186-H111 Alüminyum Alaşımı Bağlantılarının Mekanik ve Mikroyapı Özelliklerinin İncelenmesi

DİLEK M., BİRCAN D. A., EKŞİ A. K., Iynen O.
1st International Conference on Welding Technologies, Adana, Türkiye, 11 - 13 Haziran 2009, ss.100

Design and Investigation of Improvement of Fatigue Properties of the Machine Elements Produced by Powder Metallurgy

Iynen O., EKŞİ A. K., BİRCAN D. A., DİLEK M.
5th International Advanced Technologies Symposium (IATS?09), Karabük, Türkiye, 13 - 15 Mayıs 2009, ss.978-983

Experimental and Numerical Studies of Metal Powders Pressed By Cold Isocratic Pressing Unit Case Aluminum and Iron

EKŞİ A. K., BİRCAN D. A.
5. International Powder Metalurgy Conference, Ankara, Türkiye, 8 - 12 Ekim 2008, ss.168-176

Soğuk ve Sıcak Preslenen Alüminyum Alaşımlarının (Al7xxx) Mekanik Özellikleri

EKŞİ A. K., BİRCAN D. A.
11th International Materials Symposium, Denizli, Türkiye, 19 - 21 Nisan 2006, ss.807-814

The Investigation in Properties of Welded Dissimilar Al Alloys by Friction Stir Welding

DİLEK M., EKŞİ A. K., BİRCAN D. A.
11th International Materials Symposium, Denizli, Türkiye, 19 - 21 Nisan 2006, ss.728-733

Comparıson and investıgatıon of mechanıcal propertıes of bronze and copper powders compressed by computer controlled uniaxial die and cold isostatıc pressıng methods

EKŞİ A. K., SÜLEYMAN S.
3th. International Powder Metallurgy Conference, 5 - 08 Eylül 2002

Metal ve seramik tozlarının bilgisayar kontrollü tek eksenli kalıpta preslenmesi

EKŞİ A. K., KURT A. O.
Uluslararası Katılımlı 2. Ulusal Toz Metalürjisi Konferansı, Türkiye, 15 - 17 Eylül 1999

Bilgisayar kontrollü tek eksenli kalıpta preslenen bakır ve bronz tozlarının mekanik özelliklerinin incelenmesi

Ekşi A. K., Kurt A. O.
Bilim Günleri Makine Mühendisleri Odası Denizli Şubesi, Denizli, Türkiye, 5 - 07 Mayıs 1999, ss.1

Kitap & Kitap Bölümleri

Influence of Shot Peening on Mechanical Properties of the Alumix 431 PM Alloys

Iynen O., EKŞİ A. K., BİRCAN D. A., DİLEK M.
Powder Metallurgy for Automotive, Aluminum Alloys, Hard and Super Hard Materials, Ramakrishnan P. , Editör, Medtec, Delhi, ss.125-135, 2013

Metrikler

Yayın

83

Atıf (WoS)

18

H-İndeks (WoS)

2

Atıf (Scopus)

20

H-İndeks (Scopus)

3

Proje

10

Tez Danışmanlığı

7

Açık Erişim

1