Biomass Conversion and Biorefinery, 2024 (SCI-Expanded)
The amounts of H2 production through subcritical water gasification (Sub-CWG) and supercritical water gasification (Super-CWG) have been revealed in the current study. Sunflower waste (SW) was selected as the biomass used in the gasification processes. To determine the fuel characteristics of SW, proximate, ultimate, and higher heating value (HHV) analyses were conducted. The response surface methodology (RSM) was applied to design the experimental runs, to determine and optimize the process parameters, and to explore the interactions between them, which included reaction temperature, feed concentration, and residence time. Furthermore, various catalyst additives (K2CO3, Na2CO3, and NaOH) were used at the optimum level of process parameters to investigate the effect of catalyst on H2 production. According to the results of gasification processes, the amount of H2 production in Sub-CWG was lower when compared to Super-CWG and the main gas yield was CO2 and CH4 due to low reaction temperature and residence time. On the other hand, it has been revealed that Super-CWG is much more efficient in H2 production. Elevated temperatures and extended residence times enhance H2 production by facilitating key reactions such as the water–gas shift and steam reforming. Higher feed concentrations were found to reduce H2 production due to dilution effects and reduced water availability. The RSM explored that the created model matched the experimental data in H2 production since the correlation coefficient values were high enough (R2 = 99.83%, R2Adj = 99.52%). In the second part of the study, catalytic Super-CWG experiments were conducted using the optimum process parameters determined by RSM. According to the results, NaOH significantly improves H2 production by enhancing C–C bond cleavage and promoting the water–gas shift reaction, and the mechanistic basis for catalytic activity lies in the reduction of CO and CO2 formation, thus maximizing H2 production.