Akademik Veri Yönetim Sistemi
THIN SOLID FILMS, cilt.732, 2021 (SCI-Expanded)
In this study, high-quality p-type NiO semiconductor thin film was investigated using the thermal evaporation method after thermal oxidation of as-deposited 50 nm Ni film at 450 degrees C for 2.5 h. NiO thin film simultaneously formed on substrates of different nature; glass, sapphire, Si(100), InP, and GaAs. The structural properties of NiO films were determined as cubic phase with a space group of Fm (3) over barm by X-ray diffraction analysis. We observed that the Ni ions were interacted with sapphire, InP, and GaAs substrates rather than glass and Si(100) substrates. During the annealing process, Ni ions diffused into the sapphire, InP, and GaAs substrates, and resulted in a formation of secondary phases of NiAl, NixP/Ni2InP, and NiAs/Ni2GaAs. Scanning electron microscopy images managed to determine the average film thickness that is also affected by Ni-surface interactions. The optical transparency was determined to be at approximately 94% and 89% transmittance in the range of 300-800 nm for the NiO film on sapphire and glass samples, respectively. The direct optical band gap of NiO films on glass and sapphire substrates were calculated by Tauc's equation and found to be 3.63 eV and 3.67 eV, respectively. NiO films on glass and sapphire surfaces exhibited a p-type characteristic that was confirmed by Hall-effect measurements. The magnetic field dependence of magnetization was measured at 10 K and 300 K and the maximum saturation magnetization and the effective magnetic moment were recorded as 245 x 10(3) A/m and 2.58 mu B , respectively, for the NiO film on the glass at 10 K.