Metrikler
Yayın
45
BM Sürdürülebilir Kalkınma Amaçları
Eğitim Bilgileri
2014 - 2019
2014 - 2019Doktora
Çukurova Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği A.B.D., Türkiye
2012 - 2014
2012 - 2014Yüksek Lisans
Çukurova Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği A.B.D., Türkiye
2007 - 2011
2007 - 2011Lisans Çift Anadal
Dumlupınar Ünıversıtesı, Mühendislik Fakültesi, Makine Mühendisliği, Türkiye
2005 - 2009
2005 - 2009Lisans
Dumlupınar Ünıversıtesı, Mühendislik Fakültesi, Seramik Mühendisliği, Türkiye
Yaptığı Tezler
2019
2019Doktora
Investigation of physical and mechanical properties of 316L and 410 stainless steels manufactured by powder metallurgy method
Çukurova Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği Anabilim Dalı
2014
2014Yüksek Lisans
Investigating the structural and physical properties for Al-7000 series prepared on different temperatures and pressures
Çukurova Üniversitesi, Fen Bilimleri Enstitüsü, Makine Mühendisliği A.B.D.
Araştırma Alanları
Makina Mühendisliği
Konstrüksiyon ve İmalat
Malzeme
Metalurji ve Malzeme Mühendisliği
Malzeme Bilimi ve Mühendisliği
Metalik Malzemeler
Mühendislik ve Teknoloji
Akademik Ünvanlar / Görevler
2020 - Devam Ediyor
2020 - Devam EdiyorDr. Öğr. Üyesi
Çukurova Üniversitesi, Ceyhan Mühendislik Fakültesi, Makine Mühendisliği
2019 - 2020
2019 - 2020Araştırma Görevlisi Dr.
Çukurova Üniversitesi, Ceyhan Mühendislik Fakültesi, Makine Mühendisliği
2011 - 2019
2011 - 2019Araştırma Görevlisi
Çukurova Üniversitesi, Ceyhan Mühendislik Fakültesi, Makine Mühendisliği
Makaleler
Tümü (12)
SCI-E, SSCI, AHCI (6)
SCI-E, SSCI, AHCI, ESCI (7)
ESCI (1)
Scopus (5)
TRDizin (2)
Diğer Yayınlar (4)
2024
20241. The impact of glass powder on surface and morphological properties of Alumix 431 alloy
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The International Journal of Materials and Engineering Technology
, cilt.7, sa.1, ss.32-37, 2024 (Hakemli Dergi)
2022
20222. Pressure effect on the structural, magnetic and thermophysical properties of X12Cr13 martensitic stainless steel prepared by powder metallurgy method
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
MATERIALS TODAY COMMUNICATIONS , cilt.33, ss.104924-104935, 2022 (SCI-Expanded)
2022
20223. Green synthesis of Fe (II, III) oxides nanoparticles in the subcritical water medium and evaluation of their catalytic performance in the oxidation of metoprolol
Mutlu R. N., Yabalak E., Acar A. N., Gizir A. M.
JOURNAL OF NANOSTRUCTURE IN CHEMISTRY , cilt.12, sa.1, ss.79-92, 2022 (SCI-Expanded)
2022
20224. The effect of borax addition to aluminum alloy produced by powder metallurgy on mechanical and thermophysical properties
Mutlu R. N., Acar A. N., Gizir A. M.
Anti-Corrosion Methods And Materials , cilt.69, sa.1, ss.63-70, 2022 (SCI-Expanded, Scopus)
2021
20215. Structural and Surface Properties of Glass Powder Coated Cr Steels
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The International Journal of Materials and Engineering Technology
, cilt.4, sa.2, ss.109-116, 2021 (Hakemli Dergi)
2021
20216. Fe Addition Influence on the Mechanical and Thermophysical Behaviours of PM Alumix 431 Allo
Acar A. N., Mutlu R. N., Kaya D., Ekşi A. K., Ekicibil A.
JOURNAL OF MOLECULAR STRUCTURE , cilt.1, sa.1, ss.130031-130045, 2021 (SCI-Expanded, Scopus)
2020
20207. Pressure Influence on the Thermophysical Properties of 316L Austenitic Stainless Steels Manufactured By Powder Metallurgy Method
Acar A. N., Ekşi A. K., Ekicibil A.
Çukurova Üniversitesi Mühendislik Mimarlık Fakültesi Dergisi , cilt.35, sa.1, ss.241-249, 2020 (Hakemli Dergi)
2019
20198. Effect of pressure on the magnetic and structural properties of X2CrNiMo17-12-2 austenitic stainless steel prepared by powder metallurgy method
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
JOURNAL OF MOLECULAR STRUCTURE
, cilt.1198, 2019 (SCI-Expanded)
2019
20199. Thermophysical Behaviours Of P/M Distaloy AE Alloys at Temperature Range of 0-600°C
Acar A. N., Ekşi A. K., Ekicibil A.
The International Journal of Materials and Engineering Technology,(TIJMET) , cilt.002, ss.64-69, 2019 (Hakemli Dergi)
2018
201810. The Physical Properties Of Aluminium-7xxx Series Alloys Produced By Powder Metallurgy Method
Acar A. N., Ekşi A. K., Ekicibil A.
JOURNAL OF POLYTECHNIC-POLITEKNIK DERGISI
, cilt.21, ss.341-350, 2018 (ESCI)
2018
201811. Effect of temperature and pressure on mechanical, surface and electrochemical properties of Al-1.5Cu-5.5Zn-2.5Mg (Alumix-431)
ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., Yazici B.
ANTI-CORROSION METHODS AND MATERIALS
, cilt.65, sa.6, ss.558-571, 2018 (SCI-Expanded, Scopus)
2015
201512. Some Transport Properties of Alumix-431 Materials by Prepared P/M Method
Ekşi A. K., Acar A. N., Ekicibil A.
Manufacturing Science and Technology , cilt.3, sa.5, ss.253-258, 2015 (Hakemli Dergi)
Hakemli Bilimsel Toplantılarda Yayımlanmış Bildiriler
2025
20251. Cement Powder Effect on the Structural and Morphological Properties of Al5.5Zn 2.5Mg1.5Cu alloy(Alumix 431)
Acar A. N.
6th International Conference of Materials and Engineering Technology (TICMET'25), Gaziantep, Türkiye, 6 - 09 Ekim 2025, ss.428-434, (Tam Metin Bildiri)
2025
20252. ’Structural and Surface Morphology of Martensitic Stainless Steel – Glass powder Composite Materials During Corrosion Study
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
12th international conference on Materials Science and Nanotechnology for Next Generation; MSNG2025, Sivas, Türkiye, 10 - 12 Eylül 2025, ss.40, (Özet Bildiri)
2023
20233. The Impact of Glass Powder on Surface and Morphological Properties of Alumix 431 Alloy
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The 5th International Conference of Materials and Engineering Technology (TICMET'23), Trabzon, Türkiye, 13 - 16 Kasım 2023, ss.345, (Özet Bildiri)
2022
20224. Effect of 10% Portland limestone cement powder on the morphological properties of X12Cr13 martensitic stainless steels
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
4th International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2022), Ankara, Türkiye, 14 - 16 Aralık 2022, ss.570-574, (Tam Metin Bildiri)
2022
20225. Surface and Structural Properties of Martensitic Stainless Steel –Glass Powder Composite Materials Prepared by Powder Metallurgy Method
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The 4th International Conference of Materials and Engineering Technology (TICMET'22), İstanbul, Türkiye, 8 - 10 Eylül 2022, ss.99-103, (Tam Metin Bildiri)
2021
20216. Structural And Surface Propertıes Of Glass Powder Coated Cr Steels
Acar A. N., Kaya D., Ekşi A. K., Ekicibil A.
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.252, (Özet Bildiri)
2021
20217. A Revıew on Alumınıum Matrıx Composıtes Manufactured by Powder Metallurgy,
Pesen E., Ekşi A. K., Acar A. N., Ekicibil A.
The 3rd International Conference of Materials and Engineering Technology (TICMET'21), Gaziantep, Türkiye, 5 - 06 Kasım 2021, ss.54-62, (Tam Metin Bildiri)
2021
20218. Effect of Glass Powder on the Surface and Microstructural Properties of Dual Phase Steels
Acar A. N., Ekşi A. K., Ekicibil A.
’8th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2021), Elazığ, Türkiye, 14 - 16 Temmuz 2021, ss.13-19, (Tam Metin Bildiri)
2019
20199. Thermophysical Behaviors of Alumix (431)–Fe Alloy Mixtures Prepared by Powder Metallurgy Method
Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.
6th ınternational Conference on Materials Science and Nanotechnology for Next Generation (MSNG2019), Niğde, Türkiye, 16 - 18 Ekim 2019, ss.70-74, (Tam Metin Bildiri)
2019
201910. Specific Heat Capacity Behaviours of P/M Distaloy AE Alloy Compacts
Acar A. N., Ekşi A. K., Ekicibil A.
International Conference on Condensed Matter and Materials Science-2019 (ICCMMS-19), Adana, Türkiye, 14 - 19 Ekim 2019, ss.7-13, (Tam Metin Bildiri)
2019
201911. Corrosion Properties Of Distaloy AE Alloys Prepared By P M Method In 1M KOH Solutıon
Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.
The International Conference of Materials and Engineering Technologies (TICMET’19), Gaziantep, Türkiye, 10 - 12 Ekim 2019, ss.743-751, (Tam Metin Bildiri)
2019
201912. Structural and Physical Properties of Sintered Distaloy AE Alloy Compacts
Acar A. N., Ekşi A. K., Ekicibil A.
Fourth International Iron and Steel Symposium (UDCS'19 Fourth International Iron and Steel Symposium, Karabük, Türkiye, 4 - 06 Nisan 2019, ss.231-233, (Tam Metin Bildiri)
2019
201913. Hardness, Density and Surface Properties of P/M Alumix-(431)–Fe Alloy Mixtures
Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.288-290, (Tam Metin Bildiri)
2019
201914. ’Magnetization and Electrical Resistivity of Al-7xxx Alloys Manufacturing by Powder Metallurgy Method
Acar A. N., Ekşi A. K., Ekicibil A.
4th International Mediterranean Science and Engineering Congress (IMSEC 2019), Antalya, Türkiye, 25 - 27 Nisan 2019, ss.291-293, (Tam Metin Bildiri)
2018
201815. Corrosion Properties of Austenitic and Martensitic Stainless Steels Produced by Powder Metallurgy Method”
Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A., Yazıcı B.
XVth International Corrosion Symposium (KORSEM’18), Hatay, Türkiye, 26 - 28 Eylül 2018, ss.369-381, (Tam Metin Bildiri)
2018
201816. Pressure Influence on the Thermophysical Properties of the P/M- Fe-Cr Martensitic Stainless Steels
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
1st International Eurasian Conference on Science, Engineering and Technology (EurasianSciEnTech 2018), Ankara, Türkiye, 22 - 23 Kasım 2018, ss.2020-2024, (Tam Metin Bildiri)
2018
201817. Evaluation of the Impact Toughnesses of the P/M-X12Cr13 Martensitic Stainless Steels
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
3rd International Mediterranean Science and Engineering Congress (IMSEC 2018), Adana, Türkiye, 24 - 26 Ekim 2018, ss.306-309, (Tam Metin Bildiri)
2018
201818. Investigation of Magnetic Properties of Zamak-2 Alloy Prepared by Powder Metallurgy
KOCA B., MUTLU R. N., ACAR A. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.
5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.334-337, (Tam Metin Bildiri)
2018
201819. On the View of the Impact Toughness of P/M- X2CrNiMo17-12-2 Austenitic Stainless Steels?
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
5th Internatıonal Conference on Materials Science and Nanotechnology for Next Generation (MSNG2018), Nevşehir, Türkiye, 4 - 06 Ekim 2018, ss.1-4, (Tam Metin Bildiri)
2018
201820. On the View of the Thermo-Physical Properties of X2CrNiMo17-12-2 Austenitic Stainless Steels Prepared by P/M Method
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
International Conference on Physical Chemistry and Functional Materials (PCFM 2018), Elazığ, Türkiye, 19 - 21 Haziran 2018, ss.120, (Tam Metin Bildiri)
2017
201721. On the Study of the Structural Properties of Fe-Cr Martensitic Stainless Steels Prepared by Powder Metallurgy Method
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
2nd International Mediterranean Science and Engineering Congress (IMSEC 2017), Adana, Türkiye, 25 - 27 Ekim 2017, ss.1, (Özet Bildiri)
2017
201722. On the Structural Properties of Martensitic and Austenitic Stainless STeels Prepared by Powder Metallurgy
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
2nd International Conference on Material Science and Technology in Cappadocia (IMSTEC'17), Nevşehir, Türkiye, 11 - 13 Ekim 2017, ss.750, (Tam Metin Bildiri)
2017
201723. The Effect of Pressure on the Magnetic Properties of X12Cr13 Martensitic Stainless Steels Prepared by Powder Metallurgy Method
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
International Conference on Condensed Matter and Material Sciences(ICCMMS2017), Adana, Türkiye, 11 - 15 Ekim 2017, ss.85, (Tam Metin Bildiri)
2017
201724. Investigating of Structural Properties of 316L Austenitic Stainless Steels Manufactured by P/M Method
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
4th International Conference on Materials Science and Nanotechnology for Next Generation (MSNG-2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.276, (Tam Metin Bildiri)
2017
201725. The Magnetic Properties of X2CrNiMo17-12-2 Austenitic Stainless Steels Produced by P/M Method
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
4th International Conference on Materials Science and Nanotechnology for Next Generation (MSNG-2017), Saraybosna, Bosna-Hersek, 28 - 30 Haziran 2017, ss.268, (Tam Metin Bildiri)
2016
201626. Investigation of the Mechanical and Surface Properties of Alumix 431 Alloys Prepared by Powder Metallurgy
ACAR A. N., MUTLU R. N., EKŞİ A. K., EKİCİBİL A., YAZICI B.
1st International Mediterranean Science and Engineering Congress, Adana, Türkiye, 26 - 28 Ekim 2016, ss.1, (Özet Bildiri)
2016
201627. The DSC Studies and Thermoelectric Properties of Alumix (431) Alloy prepared by P/M Method
Acar A. N., Ekşi A. K., Ekicibil A.
2nd International of Advanced and Functional Material Technologies (AFMAT), Antalya, Türkiye, 20 - 22 Ekim 2016, ss.11, (Özet Bildiri)
2016
201628. Investigation of Alumix (431) Anode for Al-Air Battery Performance
Mutlu R. N., Acar A. N., Ekşi A. K., Ekicibil A., Yazıcı B.
2nd International of Advanced and Functional Material Technologies (AFMAT), Antalya, Türkiye, 20 - 22 Ekim 2016, ss.25, (Özet Bildiri)
2016
201629. Corrosion Properties Of Cold And Warm Compacted Alumix 431 Alloys
Acar A. N., Mutlu R. N., Ekşi A. K., Ekicibil A., Yazıcı B.
International Energy and Engineering Conference, Gaziantep, Türkiye, 13 - 14 Ekim 2016, ss.820, (Özet Bildiri)
2015
201530. A study of physical and thermoelectric properties of alumix 431 materials produced P M method
ACAR A. N., EKŞİ A. K., EKİCİBİL A.
European Congress and Exhibition on Advanced Materials and Processes, Varşova, Polonya, 20 - 24 Eylül 2015, (Özet Bildiri)
2014
201431. The Fatigue Properties of the Machine Elements Produced By Powder Metallurgy
Ünal S., Ekşi A. K., Acar A. N., Dede D.
7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.50-51, (Tam Metin Bildiri)
2014
201432. Review: Searching of Thermoelectric Properties of of Al and Al Derivated Alloys Produced P/M Methods
ACAR A. N., EKŞİ A. K.
7th International Powder Metallurgy Conference and Exhibition, Ankara, Türkiye, 24 - 28 Haziran 2014, ss.40-41, (Tam Metin Bildiri)
Desteklenen Projeler
2021 - 2023
2021 - 2023Paslanmaz çelik çimento-cam tozu kompozit malzeme üretimi ve yapısal fiziksel ve mekaniksel özelliklerinin incelenmesi
Yükseköğretim Kurumları Destekli Proje , BAP Araştırma Projesi
Acar A. N. (Yürütücü), Kaya D., Ekşi A. K., Ekicibil A.
2018 - 2022
2018 - 2022Toz Metalurjisi Metoduyla Üretilen 316 L Östenitik ve 410 Martenzitik Paslanmaz Çeliklerin Fiziksel ve Mekaniksel Özelliklerin İncelenmesi
Yükseköğretim Kurumları Destekli Proje , BAP Araştırma Projesi
EKŞİ A. K. (Yürütücü), ACAR A. N., EKİCİBİL A.